X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpcs440ep.h;h=d467338e920add6025f65cc75b5d47f88908e75b;hb=d25dfe08fbd1220cb994e7e6b105049aa9aa8e79;hp=69d97d66ea1528bc7ceb191ebf624f8e9778fe8b;hpb=4ef218f6fdf8d747f4589da5252b004e7d2c2876;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 69d97d6..d467338 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -197,16 +197,16 @@
 #define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
 #define CONFIG_BOARD_SPECIFIC_LED	1
 
-#define STATUS_LED_BIT		0x08			/* LED 1 is on GPIO_PPC_1 */
+#define STATUS_LED_BIT		0x08			/* DIAG1 is on GPIO_PPC_1 */
 #define STATUS_LED_PERIOD	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE	STATUS_LED_OFF
-#define STATUS_LED_BIT1		0x04			/* LED 2 is on GPIO_PPC_2 */
+#define STATUS_LED_BIT1		0x04			/* DIAG2 is on GPIO_PPC_2 */
 #define STATUS_LED_PERIOD1	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE1	STATUS_LED_ON
-#define STATUS_LED_BIT2		0x02			/* LED 3 is on GPIO_PPC_3 */
+#define STATUS_LED_BIT2		0x02			/* DIAG3 is on GPIO_PPC_3 */
 #define STATUS_LED_PERIOD2	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE2	STATUS_LED_OFF
-#define STATUS_LED_BIT3		0x01			/* LED 4 is on GPIO_PPC_4 */
+#define STATUS_LED_BIT3		0x01			/* DIAG4 is on GPIO_PPC_4 */
 #define STATUS_LED_PERIOD3	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE3	STATUS_LED_OFF
 
@@ -247,39 +247,48 @@
 #define CONFIG_HW_WATCHDOG			/* watchdog */
 #endif
 
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DIAG	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_EXT2	| \
-				CFG_CMD_FAT	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NET	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_REGINFO	| \
-				CFG_CMD_REISER	| \
-				CFG_CMD_SDRAM	| \
-				CFG_CMD_USB	)
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
 
-#define CONFIG_SUPPORT_VFAT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_REISER
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_USB
+
+#define CONFIG_SUPPORT_VFAT
 
 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
@@ -429,15 +438,6 @@
 }											\
 }
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
@@ -446,7 +446,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
@@ -480,10 +480,4 @@
 /* Offset for alternate registers	*/
 #define CFG_ATA_ALT_OFFSET	(0x0000)
 
-/* These addresses need to be shifted one place to the left
- * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
- * These values are shifted
- */
-#define CFG_ATA_PORT_ADDR(port) ((port) << 1)
-
 #endif	/* __CONFIG_H */