X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpcs440ep.h;h=66075d282497552623568589f3c27120a87684ea;hb=abbb90666d5ef2f500ebbedbb80ff60adc56b043;hp=8e51d2d3c05bebb5354fe5465dd9f4e4c75500e1;hpb=85fad497b3c2e99fa48d18351d2898cf8cdbe898;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 8e51d2d..66075d2 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -27,6 +27,12 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+
+/* new uImage format support */
+#define CONFIG_FIT		1
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
+
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
@@ -66,7 +72,7 @@
  *----------------------------------------------------------------------*/
 #define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
-#define CFG_INIT_RAM_END	(8 << 10)
+#define CFG_INIT_RAM_END	(4 << 10)
 #define CFG_GBL_DATA_SIZE	256			/* num bytes initial data*/
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
@@ -86,7 +92,7 @@
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 
 /*-----------------------------------------------------------------------
  * FLASH related
@@ -103,17 +109,17 @@
 
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
+#define CONFIG_ENV_ADDR		(CFG_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 #define CONFIG_ENV_OVERWRITE	1
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 #define ENV_NAME_REVLEV	"revision_level"
 #define ENV_NAME_SOLDER	"solder_switch"
@@ -137,12 +143,11 @@
 
 #define CFG_I2C_EEPROM_ADDR	(0xa4>>1)
 #define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
 #define CFG_EEPROM_PAGE_WRITE_BITS 3
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 #define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS
@@ -172,7 +177,7 @@
 	"load=tftp 100000 /tftpboot/pcs440ep/u-boot.bin\0"		\
 	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
 		"cp.b 100000 FFFA0000 60000\0"			        \
-	"upd=run load;run update\0"					\
+	"upd=run load update\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -182,10 +187,6 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 #endif
 
-#define CONFIG_PREBOOT	"echo;" \
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
-	"echo"
-
 /* check U-Boot image with SHA1 sum */
 #define CONFIG_SHA1_CHECK_UB_IMG	1
 #define CONFIG_SHA1_START		CFG_MONITOR_BASE
@@ -266,7 +267,10 @@
 #define CONFIG_CMD_DIAG
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
@@ -274,12 +278,10 @@
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_REISER
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_USB
 
-
 #define CONFIG_SUPPORT_VFAT
 
 /*
@@ -364,7 +366,7 @@
 /*-----------------------------------------------------------------------
  * PPC440 GPIO Configuration
  */
-#define CFG_440_GPIO_TABLE { /*	  Out		       GPIO	Alternate1	Alternate2   Alternate3 */ \
+#define CFG_4xx_GPIO_TABLE { /*	  Out		       GPIO	Alternate1	Alternate2   Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG},  /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/ \
@@ -437,15 +439,6 @@
 }											\
 }
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
@@ -488,10 +481,4 @@
 /* Offset for alternate registers	*/
 #define CFG_ATA_ALT_OFFSET	(0x0000)
 
-/* These addresses need to be shifted one place to the left
- * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
- * These values are shifted
- */
-#define CFG_ATA_PORT_ADDR(port) ((port) << 1)
-
 #endif	/* __CONFIG_H */