X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpcm058.h;h=b9bc08b38832bfe18c4ddc7f1a1d06b617c09a4f;hb=87f78478a4a1bf574db0b0e575ca37cf91fb187c;hp=ffe861149750b9b35ed06c140e0cc1ae075600b9;hpb=1fdf7c64edcc4131934013741b1902b79c8715fd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h
index ffe8611..b9bc08b 100644
--- a/include/configs/pcm058.h
+++ b/include/configs/pcm058.h
@@ -1,20 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) Stefano Babic <sbabic@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 
 #ifndef __PCM058_CONFIG_H
 #define __PCM058_CONFIG_H
 
-#include <config_distro_defaults.h>
-
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_YMODEM_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
 #include "imx6_spl.h"
 #endif
@@ -27,14 +20,11 @@
 /* Serial */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	       UART2_BASE
-#define CONFIG_CONSOLE_DEV		"ttymxc1"
+#define CONSOLE_DEV		"ttymxc1"
 
 #define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
 
 /* Early setup */
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 
 /* Size of malloc() pool */
@@ -42,18 +32,12 @@
 
 /* Ethernet */
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		3
 
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_KSZ9031
-
 /* SPI Flash */
-#define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS		0
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED		20000000
@@ -66,40 +50,19 @@
 #define CONFIG_SYS_I2C_SPEED		  100000
 
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_CMD_NAND
 /* Enable NAND support */
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_NAND_MXS
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
 #endif
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
 
 /* Filesystem support */
-#define CONFIG_LZO
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define MTDIDS_DEFAULT    "nand0=nand"
-#define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
-
-/* Various command support */
-#define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
-#define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
-#define CONFIG_CMD_GSC
-#define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
-#define CONFIG_CMD_UBI
-#define CONFIG_RBTREE
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -116,7 +79,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 
 /* Environment organization */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                (16 * 1024)
 #define CONFIG_ENV_OFFSET		(1024 * SZ_1K)
 #define CONFIG_ENV_SECT_SIZE		(64 * SZ_1K)