X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpcm052.h;h=71c5078cc797744115e2aa427d6c183d71170d22;hb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;hp=f3cf95469a2b94857d8d051e8566f2b72190a9c6;hpb=88c7da627569317f3d9256e8134bcbb38e7747dd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index f3cf954..71c5078 100644
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -11,10 +11,6 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_VF610
-
-#define CONFIG_SYS_THUMB_BUILD
-
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
 /* Enable passing of ATAGs */
@@ -23,15 +19,10 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
 
 /* NAND support */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 #ifdef CONFIG_CMD_NAND
@@ -40,13 +31,7 @@
 
 #define CONFIG_JFFS2_NAND
 
-/* UBI */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
 /* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 
@@ -71,9 +56,6 @@
 
 /*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/
 
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
@@ -96,13 +78,11 @@
 #define CONFIG_SYS_I2C_MXC
 
 /* RTC (actually an RV-4162 but M41T62-compatible) */
-#define CONFIG_CMD_DATE
 #define CONFIG_RTC_M41T62
 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 #define CONFIG_SYS_RTC_BUS_NUM 2
 
 /* EEPROM (24FC256) */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 #define CONFIG_SYS_I2C_EEPROM_BUS 2
@@ -236,12 +216,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
-
 /* Physical memory map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			(0x80000000)
@@ -256,9 +230,7 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* environment organization */
 #ifdef CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_SIZE			(8 * 1024)