X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpcm052.h;h=17600f5550ae74d134bad988deb1f3569390b2c8;hb=07dea2e737f78ee70e81c27d976811f0e9fdbad8;hp=ba3b9750de0b1423fcd3e72e12fc7cddc24d8258;hpb=7966b43778f2556ecbda2275f1296934071224b2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index ba3b975..17600f5 100644
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -11,8 +11,6 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_THUMB_BUILD
-
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
 /* Enable passing of ATAGs */
@@ -23,11 +21,8 @@
 
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
 
 /* NAND support */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 #ifdef CONFIG_CMD_NAND
@@ -36,32 +31,12 @@
 
 #define CONFIG_JFFS2_NAND
 
-/* UBI */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
 /* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 
-#ifndef MTDIDS_DEFAULT
-#define MTDIDS_DEFAULT			"nand0=NAND"
 #endif
 
-#ifndef MTDPARTS_DEFAULT
-#define MTDPARTS_DEFAULT		"mtdparts=NAND:640k(bootloader)"\
-					",128k(env1)"\
-					",128k(env2)"\
-					",128k(dtb)"\
-					",6144k(kernel)"\
-					",-(root)"
-#endif
-
-#endif
-
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
@@ -72,8 +47,6 @@
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_FEC_MXC_PHYADDR          0
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 
 /* QSPI Configs*/
 
@@ -89,13 +62,11 @@
 #define CONFIG_SYS_I2C_MXC
 
 /* RTC (actually an RV-4162 but M41T62-compatible) */
-#define CONFIG_CMD_DATE
 #define CONFIG_RTC_M41T62
 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 #define CONFIG_SYS_RTC_BUS_NUM 2
 
 /* EEPROM (24FC256) */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 #define CONFIG_SYS_I2C_EEPROM_BUS 2
@@ -104,8 +75,7 @@
 #define CONFIG_LOADADDR			0x82000000
 
 /* We boot from the gfxRAM area of the OCRAM. */
-#define CONFIG_SYS_TEXT_BASE		0x3f408000
-#define CONFIG_BOARD_SIZE_LIMIT		524288
+#define CONFIG_BOARD_SIZE_LIMIT		520192
 
 /* if no target-specific extra environment settings were defined by the
    target, define an empty one */
@@ -148,7 +118,7 @@
 	"nfs_root=/path/to/nfs/root\0" \
 	"tftptimeout=1000\0" \
 	"tftptimeoutcountmax=1000000\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"bootargs_base=setenv bootargs rw " \
 		" mem=" __stringify(CONFIG_PCM052_DDR_SIZE) "M " \
 		"console=ttyLP1,115200n8\0" \
@@ -215,26 +185,12 @@
 		"nand write ${ram_addr} root ${filesize}; fi\0"
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		\
-			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START	0x80010000
 #define CONFIG_SYS_MEMTEST_END		0x87C00000
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
-
 /* Physical memory map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			(0x80000000)