X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpcm030.h;h=47ded819c3d8d50192ff502b31fcf2562ccdb86d;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=a608c872d5550f22a7144a211baf4cf4f5bae01c;hpb=1a4596601fd395f3afb8f82f3f840c5e00bdd57a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h
index a608c87..47ded81 100644
--- a/include/configs/pcm030.h
+++ b/include/configs/pcm030.h
@@ -8,7 +8,7 @@
  * (C) Copyright 2009
  * Jon Smirl <jonsmirl@gmail.com>
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -20,8 +20,7 @@
 High Level Configuration Options
 (easy to change)
 -----------------------------------------------------------------------------*/
-#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
+#define CONFIG_MPC5200		1	/* This is an MPC5200 CPU */
 #define CONFIG_MPC5200_DDR	1	/* (with DDR-SDRAM) */
 #define CONFIG_PHYCORE_MPC5200B_TINY 1	/* phyCORE-MPC5200B -> */
 					/* FEC configuration and IDE */
@@ -51,15 +50,9 @@ Serial console configuration
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
@@ -74,15 +67,8 @@ Serial console configuration
 #define MTDPARTS_DEFAULT   	"mtdparts=physmap-flash.0:256k(ubootl)," \
 	"1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
 
-/*-----------------------------------------------------------------------------
-Autobooting
------------------------------------------------------------------------------*/
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow stopping of boot process */
-					/* even with bootdelay=0 */
 #undef	CONFIG_BOOTARGS
 
-
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\
 		"mount root filesystem over NFS;" \
@@ -127,8 +113,6 @@ IPB Bus clocking configuration.
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  * -----------------------------------------------------------------------*/
-#define CONFIG_PCI			1
-#define CONFIG_PCI_PNP			1
 #define CONFIG_PCI_SCAN_SHOW		1
 #define CONFIG_PCI_MEM_BUS		0x40000000
 #define CONFIG_PCI_MEM_PHYS		CONFIG_PCI_MEM_BUS
@@ -341,7 +325,6 @@ RTC configuration
  Miscellaneous configurable options
 -------------------------------------------------------------------------------*/
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
 
 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */
 
@@ -364,9 +347,6 @@ RTC configuration
 #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
 
 #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_DISPLAY_BOARDINFO 1
 
 /*-----------------------------------------------------------------------------
  Various low-level settings
@@ -416,17 +396,10 @@ RTC configuration
 #define CONFIG_SYS_ATA_STRIDE		4
 #define CONFIG_ATAPI			1
 
-/* we enable IDE and FAT support, so we also need partition support */
-#define CONFIG_DOS_PARTITION 1
-
 /* USB */
 #define CONFIG_USB_OHCI
-#define CONFIG_USB_STORAGE
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-
 #define OF_CPU				"PowerPC,5200@0"
 #define OF_TBCLK			CONFIG_SYS_MPC5XXX_CLKIN
 #define OF_SOC				"soc5200@f0000000"