X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fp1_p2_rdb_pc.h;h=f7d8723b03d4faedc810c4b1a452b60db6bfe34e;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=c2fc3b04357f94f6f2e435e898ee2de1ceda1b57;hpb=5b160c3a13f80708b4a720119cd2a1ef161e57f0;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index c2fc3b0..f7d8723 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -21,6 +21,9 @@ #define __SW_BOOT_SD 0x9c #define __SW_BOOT_NAND 0xec #define __SW_BOOT_PCIE 0x6c +#define __SW_NOR_BANK_MASK 0xfd +#define __SW_NOR_BANK_UP 0x00 +#define __SW_NOR_BANK_LO 0x02 #define CONFIG_SYS_L2_SIZE (256 << 10) #endif @@ -46,6 +49,9 @@ #define __SW_BOOT_SD 0x24 #define __SW_BOOT_NAND 0x44 #define __SW_BOOT_PCIE 0x74 +#define __SW_NOR_BANK_MASK 0xfd +#define __SW_NOR_BANK_UP 0x00 +#define __SW_NOR_BANK_LO 0x02 #define CONFIG_SYS_L2_SIZE (256 << 10) /* * Dynamic MTD Partition support with mtdparts @@ -57,9 +63,13 @@ #define __SW_BOOT_MASK 0x03 #define __SW_BOOT_NOR 0xc8 #define __SW_BOOT_SPI 0x28 -#define __SW_BOOT_SD 0x68 /* or 0x18 */ +#define __SW_BOOT_SD 0x68 +#define __SW_BOOT_SD2 0x18 #define __SW_BOOT_NAND 0xe8 #define __SW_BOOT_PCIE 0xa8 +#define __SW_NOR_BANK_MASK 0xfd +#define __SW_NOR_BANK_UP 0x00 +#define __SW_NOR_BANK_LO 0x02 #define CONFIG_SYS_L2_SIZE (512 << 10) /* * Dynamic MTD Partition support with mtdparts @@ -67,86 +77,41 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SPL_MAX_SIZE (128 * 1024) #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) -#define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif +#define CONFIG_SYS_MMC_U_BOOT_DST CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MMC_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MMC_U_BOOT_OFFS CONFIG_SPL_PAD_TO #elif defined(CONFIG_SPIFLASH) -#define CONFIG_SPL_SPI_FLASH_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SPL_MAX_SIZE (128 * 1024) #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif +#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_SPI_FLASH_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS CONFIG_SPL_PAD_TO #elif defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_TPL_BUILD -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_NAND_INIT -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SPL_MAX_SIZE (128 << 10) -#define CONFIG_SYS_MPC85XX_NO_RESETVEC #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) #elif defined(CONFIG_SPL_BUILD) -#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_MAX_SIZE 4096 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 #endif /* not CONFIG_TPL_BUILD */ - -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_TPL_PAD_TO 0x20000 -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif -#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ -#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ - -#define CONFIG_LBA48 - #define CONFIG_HWCONFIG /* * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_L2_CACHE -#define CONFIG_ENABLE_36BIT_PHYS - #define CONFIG_SYS_CCSRBAR 0xffe00000 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k - SPL code*/ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - /* DDR Setup */ -#define CONFIG_SYS_DDR_RAW_TIMING -#define CONFIG_SYS_SPD_BUS_NUM 1 #define SPD_EEPROM_ADDRESS 0x52 #if defined(CONFIG_TARGET_P1020RDB_PD) @@ -158,8 +123,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - /* Default settings for DDR3 */ #ifndef CONFIG_TARGET_P2020RDB #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f @@ -169,7 +132,6 @@ #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 @@ -203,7 +165,6 @@ * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable * (early boot only) * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0 - * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable @@ -215,10 +176,8 @@ * Local Bus Definitions */ #if defined(CONFIG_TARGET_P1020RDB_PD) -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ #define CONFIG_SYS_FLASH_BASE 0xec000000 #else -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */ #define CONFIG_SYS_FLASH_BASE 0xef000000 #endif @@ -234,15 +193,8 @@ #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} -#define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO - /* Nand Flash */ #ifdef CONFIG_NAND_FSL_ELBC #define CONFIG_SYS_NAND_BASE 0xff800000 @@ -298,9 +250,7 @@ /* Size of used area in RAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (768 * 1024) @@ -312,17 +262,9 @@ #endif /* CPLD config size: 1Mb */ -#define CONFIG_SYS_PMC_BASE 0xff980000 -#define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE -#define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ - BR_PS_8 | BR_V) -#define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ - OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ - OR_GPCM_EAD) - /* Vsc7385 switch */ #ifdef CONFIG_VSC7385_ENET -#define __VSCFW_ADDR "vscfw_addr=ef000000" +#define __VSCFW_ADDR "vscfw_addr=ef000000\0" #define CONFIG_SYS_VSC7385_BASE 0xffb00000 #ifdef CONFIG_PHYS_64BIT @@ -341,6 +283,10 @@ #define CONFIG_VSC7385_IMAGE_SIZE 8192 #endif +#ifndef __VSCFW_ADDR +#define __VSCFW_ADDR "" +#endif + /* * Config the L2 Cache as L2 SRAM */ @@ -349,31 +295,15 @@ #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) -#if defined(CONFIG_TARGET_P2020RDB) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) -#else -#define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) -#endif #elif defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_TPL_BUILD #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) #else #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) -#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) #endif /* CONFIG_TPL_BUILD */ #endif #endif @@ -386,7 +316,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) +#if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL) #define CONFIG_NS16550_MIN_FUNCTIONS #endif @@ -401,8 +331,6 @@ #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } #endif -#define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ - /* * I2C2 EEPROM */ @@ -446,8 +374,6 @@ #else #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 #endif - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif /* CONFIG_PCI */ #if defined(CONFIG_TSEC_ENET) @@ -474,15 +400,10 @@ /* * Environment */ -#if defined(CONFIG_SDCARD) -#define CONFIG_FSL_FIXED_MMC_LOCATION -#elif defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) +#if defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_TPL_BUILD #define SPL_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) #endif -#elif defined(CONFIG_SYS_RAMBOOT) -#define SPL_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #endif #define CONFIG_LOADS_ECHO /* echo on for serial download */ @@ -491,17 +412,6 @@ /* * USB */ -#define CONFIG_HAS_FSL_DR_USB - -#if defined(CONFIG_HAS_FSL_DR_USB) -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#endif -#endif - -#if defined(CONFIG_TARGET_P1020RDB_PD) -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#endif #ifdef CONFIG_MMC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR @@ -517,7 +427,6 @@ * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ /* * Environment Configuration @@ -526,31 +435,7 @@ #define CONFIG_ROOTPATH "/opt/nfsroot" #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ -#ifdef __SW_BOOT_NOR -#define __NOR_RST_CMD \ -norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ -i2c mw 18 3 __SW_BOOT_MASK 1; reset -#endif -#ifdef __SW_BOOT_SPI -#define __SPI_RST_CMD \ -spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ -i2c mw 18 3 __SW_BOOT_MASK 1; reset -#endif -#ifdef __SW_BOOT_SD -#define __SD_RST_CMD \ -sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ -i2c mw 18 3 __SW_BOOT_MASK 1; reset -#endif -#ifdef __SW_BOOT_NAND -#define __NAND_RST_CMD \ -nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ -i2c mw 18 3 __SW_BOOT_MASK 1; reset -#endif -#ifdef __SW_BOOT_PCIE -#define __PCIE_RST_CMD \ -pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ -i2c mw 18 3 __SW_BOOT_MASK 1; reset -#endif +#include "p1_p2_bootsrc.h" #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ @@ -576,14 +461,15 @@ i2c mw 18 3 __SW_BOOT_MASK 1; reset "nandbootaddr=100000\0" \ "nandfdtaddr=80000\0" \ "ramdisk_size=120000\0" \ -"map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ -"map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ -__stringify(__VSCFW_ADDR)"\0" \ -__stringify(__NOR_RST_CMD)"\0" \ -__stringify(__SPI_RST_CMD)"\0" \ -__stringify(__SD_RST_CMD)"\0" \ -__stringify(__NAND_RST_CMD)"\0" \ -__stringify(__PCIE_RST_CMD)"\0" +__VSCFW_ADDR \ +MAP_NOR_LO_CMD(map_lowernorbank) \ +MAP_NOR_UP_CMD(map_uppernorbank) \ +RST_NOR_CMD(norboot) \ +RST_SPI_CMD(spiboot) \ +RST_SD_CMD(sdboot) \ +RST_NAND_CMD(nandboot) \ +RST_PCIE_CMD(pciboot) \ +"" #define CONFIG_USB_FAT_BOOT \ "setenv bootargs root=/dev/ram rw " \