X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fp1_p2_rdb_pc.h;h=459ecf328f20853ab0b46c78cef8ac08527b9c81;hb=29d280c88a1ff331dce2d4c7a5aaf2402aa0fd8a;hp=e4de42991bfccf376d741b2714bcfefe9571356a;hpb=278b90ce786f73faf29aa522d5d101e1da006378;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index e4de429..459ecf3 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2010-2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -70,9 +69,6 @@
 /*
  * Dynamic MTD Partition support with mtdparts
  */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_FLASH_CFI_MTD
 #endif
 
 #if defined(CONFIG_TARGET_P1021RDB)
@@ -92,9 +88,6 @@
 /*
  * Dynamic MTD Partition support with mtdparts
  */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_FLASH_CFI_MTD
 #endif
 
 #if defined(CONFIG_TARGET_P1024RDB)
@@ -139,13 +132,9 @@
 /*
  * Dynamic MTD Partition support with mtdparts
  */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_FLASH_CFI_MTD
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
@@ -225,8 +214,6 @@
 #endif
 #endif
 
-#define CONFIG_MP
-
 #define CONFIG_PCIE1	/* PCIE controller 1 (slot 1) */
 #define CONFIG_PCIE2	/* PCIE controller 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
@@ -234,7 +221,6 @@
 #define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
 
-#define CONFIG_TSEC_ENET	/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_SYS_SATA_MAX_DEVICE	2
@@ -381,10 +367,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /* Nand Flash */
 #ifdef CONFIG_NAND_FSL_ELBC
@@ -428,8 +411,6 @@
 #endif
 #endif /* CONFIG_NAND_FSL_ELBC */
 
-#define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
-
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* stack in RAM */
 #ifdef CONFIG_PHYS_64BIT
@@ -524,7 +505,6 @@
 #define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
 #define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 #define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
-#define CONFIG_SPL_RELOC_STACK_SIZE	(32 << 10)
 #define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
 #if defined(CONFIG_TARGET_P2020RDB)
 #define CONFIG_SPL_RELOC_MALLOC_SIZE	(364 << 10)
@@ -555,7 +535,6 @@
  * open - index 2
  * shorted - index 1
  */
-#define CONFIG_CONS_INDEX		1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -597,11 +576,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
-/*
- * eSPI - Enhanced SPI
- */
-#define CONFIG_HARD_SPI
-
 #if defined(CONFIG_SPI_FLASH)
 #define CONFIG_SF_DEFAULT_SPEED	10000000
 #define CONFIG_SF_DEFAULT_MODE	0
@@ -657,7 +631,6 @@
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_TSEC_ENET)
-#define CONFIG_MII		/* MII PHY management */
 #define CONFIG_TSEC1
 #define CONFIG_TSEC1_NAME	"eTSEC1"
 #define CONFIG_TSEC2
@@ -772,7 +745,6 @@
 #ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_DESC_BIG_ENDIAN
 #endif
 #endif
 
@@ -781,7 +753,6 @@
 #endif
 
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
@@ -790,8 +761,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory */
-#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
 /*
@@ -809,7 +778,7 @@
 /*
  * Environment Configuration
  */
-#define CONFIG_HOSTNAME		unknown
+#define CONFIG_HOSTNAME		"unknown"
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	u-boot.bin /* U-Boot image on TFTP server */