X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fp1_p2_rdb_pc.h;h=07a75b9a1e77aae9d6c1c50a48b11b072a9e2b9d;hb=c88ecf47bdcd0af21b23a3317116bcd956f1e775;hp=5c8277908fca70927acb4dc12d74f01989b2f772;hpb=f0ca30fa19ee57e2f8452a1d0b8a30eb923d7e22;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 5c82779..07a75b9 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -73,9 +73,6 @@
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=ec000000.nor"
-#define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \
-			"57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
 #endif
 
 #if defined(CONFIG_TARGET_P1021RDB)
@@ -98,17 +95,6 @@
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_FLASH_CFI_MTD
-#ifdef CONFIG_PHYS_64BIT
-#define MTDIDS_DEFAULT "nor0=fef000000.nor"
-#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
-			"256k(dtb),4608k(kernel),9728k(fs)," \
-			"256k(qe-ucode-firmware),1280k(u-boot)"
-#else
-#define MTDIDS_DEFAULT "nor0=ef000000.nor"
-#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
-			"256k(dtb),4608k(kernel),9728k(fs)," \
-			"256k(qe-ucode-firmware),1280k(u-boot)"
-#endif
 #endif
 
 #if defined(CONFIG_TARGET_P1024RDB)
@@ -156,15 +142,6 @@
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_FLASH_CFI_MTD
-#ifdef CONFIG_PHYS_64BIT
-#define MTDIDS_DEFAULT "nor0=fef000000.nor"
-#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
-			"256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
-#else
-#define MTDIDS_DEFAULT "nor0=ef000000.nor"
-#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
-			"256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
-#endif
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -267,7 +244,6 @@
 #define CONFIG_TSEC_ENET	/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_SATA_SIL
 #define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_LIBATA
 #define CONFIG_LBA48
@@ -686,8 +662,6 @@
 #endif
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 
-#define CONFIG_CMD_PCI
-
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
 #endif /* CONFIG_PCI */
 
@@ -799,11 +773,6 @@
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
 
 /*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
-/*
  * USB
  */
 #define CONFIG_HAS_FSL_DR_USB
@@ -812,6 +781,7 @@
 #ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
 #endif
 #endif
 
@@ -832,15 +802,6 @@
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -865,8 +826,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR	1000000
 
-#define CONFIG_BOOTARGS	/* the boot command will set bootargs */
-
 #ifdef __SW_BOOT_NOR
 #define __NOR_RST_CMD	\
 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \