X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fotc570.h;h=d5eba587e443c9314a938c1b6d878d1fc88e9880;hb=dcd2f1a0d2875a1386535e2e0db9bfbd57a8fadb;hp=c068aa0153e260af8d9c681df5c3f20e4facb1f8;hpb=b2f2648d89cd295b328beac2eac91d81ba626291;p=kernel%2Fu-boot.git

diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index c068aa0..d5eba58 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -4,28 +4,12 @@
  * esd electronic system design gmbh <www.esd.eu>
  *
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * Configuation settings for the esd OTC570 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -67,7 +51,6 @@
 #define CONFIG_REVISION_TAG
 #define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
 #define CONFIG_MISC_INIT_R			/* Call misc_init_r */
-#undef	CONFIG_USE_IRQ				/* don't need IRQ/FIQ stuff */
 
 #define CONFIG_DISPLAY_BOARDINFO		/* call checkboard() */
 #define CONFIG_DISPLAY_CPUINFO			/* display cpu info and speed */
@@ -88,7 +71,6 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200, 19200, 38400, 57600, 9600}
 
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -117,14 +99,13 @@
 /* RTC and I2C stuff */
 #define CONFIG_RTC_DS1338
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68
-#undef CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-#ifdef CONFIG_SOFT_I2C
-# define CONFIG_I2C_CMD_TREE
-# define CONFIG_I2C_MULTI_BUS
+
+#define CONFIG_SYS_I2C
+#define	CONFIG_SYS_I2C_SOFT	/* I2C bit-banged	*/
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SOFT_SPEED	100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
+
 /* Configure data and clock pins for pio */
 # define I2C_INIT { \
 	at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \
@@ -142,7 +123,7 @@
 /* Set clock pin */
 # define I2C_SCL(bit)		at91_set_pio_value(AT91_PIO_PORTB, 5, bit)
 # define I2C_DELAY		udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
 
 /*
  * BOOTP options
@@ -215,7 +196,6 @@
 # define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 # define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTD, 15
 # define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 22
-# define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
@@ -227,6 +207,7 @@
 
 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -276,10 +257,4 @@
 #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + \
 					128*1024, 0x1000)
 
-#define CONFIG_STACKSIZE		(32 * 1024)	/* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-# error CONFIG_USE_IRQ not supported
-#endif
-
 #endif