X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fot1200.h;h=307797d0e3ea1292b92e9a7581a6648f21771b71;hb=b06da06dd41b9c72b06c9d03f434d4263bbf6bbd;hp=6704e973dea28d73b190f4dc84b9a66a9326d8c4;hpb=a5d67547dd9c7a527dfda1967010e703a22441ff;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index 6704e97..307797d 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
  * Copyright (C) 2014 Bachmann electronic GmbH
- *
- * SPDX-License-Identifier:     GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -13,26 +12,16 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 
-#define CONFIG_MISC_INIT_R
-
 /* UART Configs */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
 /* SF Configs */
-#define CONFIG_SPI
-#define CONFIG_MXC_SPI
-#define CONFIG_SF_DEFAULT_BUS  2
-#define CONFIG_SF_DEFAULT_CS   0
-#define CONFIG_SF_DEFAULT_SPEED 25000000
-#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
 
 /* IO expander */
 #define CONFIG_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR	0x20
 #define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x20, 16} }
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
 
 /* I2C Configs */
 #define CONFIG_SYS_I2C
@@ -43,7 +32,6 @@
 #define CONFIG_SYS_I2C_SPEED            100000
 
 /* OCOTP Configs */
-#define CONFIG_CMD_IMXOTP
 #define CONFIG_IMX_OTP
 #define IMX_OTP_BASE                    OCOTP_BASE_ADDR
 #define IMX_OTP_ADDR_MAX                0x7F
@@ -55,45 +43,33 @@
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
 /* USB Configs */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
-#ifdef CONFIG_MX6Q
-#define CONFIG_CMD_SATA
-#endif
-
 /*
  * SATA Configs
  */
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#define CONFIG_LIBATA
 #endif
 
 /* SPL */
 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
-#define CONFIG_SPL_SPI_LOAD
 #endif
 
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE             MII100
 #define CONFIG_ETHPRIME                 "FEC"
 #define CONFIG_FEC_MXC_PHYADDR          0x5
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
 
 #ifndef CONFIG_SPL
-#define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_BUS             1
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
@@ -101,16 +77,13 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 #endif
 
-/* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
-
+#define CONFIG_USE_PREBOOT
 #define CONFIG_PREBOOT                 ""
 
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+/* Thermal support */
+#define CONFIG_IMX_THERMAL
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -123,15 +96,10 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Environment organization */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                 (64 * 1024)	/* 64 kb */
 #define CONFIG_ENV_OFFSET               (1024 * 1024)
 /* M25P16 has an erase size of 64 KiB */
 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
-#define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 
 #define CONFIG_BOOTP_SERVERIP
 #define CONFIG_BOOTP_BOOTFILE