X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fot1200.h;h=2052075a5456aa23f2d8440dcc23ef7c14265435;hb=a1dc980d88a5c9c2b99251c8d8299b0c8948de73;hp=2bbf2b9a5f5f2a5f813bb4dbc91a58c3a1d70563;hpb=563e53efaadd76def21612bcf9f0236d870b6e68;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index 2bbf2b9..2052075 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -13,25 +13,14 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 
-/* FUSE Configs */
-#define CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-
 /* UART Configs */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
 /* SF Configs */
-#define CONFIG_CMD_SF
 #define CONFIG_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_SST
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS  2
 #define CONFIG_SF_DEFAULT_CS   0
@@ -46,9 +35,10 @@
 #define CONFIG_CMD_PCA953X_INFO
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED            100000
 
@@ -65,10 +55,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
 /* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
@@ -88,20 +74,13 @@
 #define CONFIG_LIBATA
 #endif
 
-
 /* SPL */
 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
 #define CONFIG_SPL_SPI_LOAD
 #endif
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                    ENET_BASE_ADDR
@@ -112,18 +91,13 @@
 #define CONFIG_PHY_SMSC
 
 #ifndef CONFIG_SPL
-#define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_BUS             1
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #endif
 
-/* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
-
 #define CONFIG_PREBOOT                 ""
 
 /* Print Buffer Size */