X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Forigen.h;h=36aaa7c14fb3c5295c4f99f49cefd515d308bc80;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=69f6930c54476b8ccce71860c790a86813f573c3;hpb=390194d43fa4478ddb638164ddb114c979f3e57a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/origen.h b/include/configs/origen.h
index 69f6930..36aaa7c 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2011 Samsung Electronics
  *
  * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_ORIGEN_H
@@ -11,47 +10,18 @@
 
 #include <configs/exynos4-common.h>
 
-/* High Level Configuration Options */
-#define CONFIG_EXYNOS4210		1	/* which is a EXYNOS4210 SoC */
-#define CONFIG_ORIGEN			1	/* working with ORIGEN*/
-
-#define CONFIG_SYS_DCACHE_OFF		1
-
 /* ORIGEN has 4 bank of DRAM */
-#define CONFIG_NR_DRAM_BANKS		4
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define PHYS_SDRAM_1			CONFIG_SYS_SDRAM_BASE
 #define SDRAM_BANK_SIZE			(256 << 20)	/* 256 MB */
 
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x6000000)
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
-#define CONFIG_SYS_TEXT_BASE		0x43E00000
-
-#define CONFIG_MACH_TYPE		MACH_TYPE_ORIGEN
-
-/* select serial console configuration */
-#define CONFIG_SERIAL2
-
-/* Console configuration */
-#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
-
-#define CONFIG_SYS_MEM_TOP_HIDE	(1 << 20)	/* ram console */
-
-#define CONFIG_SYS_MONITOR_BASE	0x00000000
-
 /* Power Down Modes */
 #define S5P_CHECK_SLEEP			0x00000BAD
 #define S5P_CHECK_DIDLE			0xBAD00000
 #define S5P_CHECK_LPA			0xABAD0000
 
-#define CONFIG_SUPPORT_RAW_INITRD
-
 /* MMC SPL */
 #define COPY_BL2_FNPTR_ADDR	0x02020030
-#define CONFIG_SPL_TEXT_BASE	0x02021410
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x40007000\0" \
@@ -67,41 +37,11 @@
         "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
         "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
                 "source ${loadaddr}\0"
-#define CONFIG_BOOTCOMMAND \
-	"if mmc rescan; then " \
-		"echo SD/MMC found on device ${mmcdev};" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"fi; " \
-	"fi;" \
-	"load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} "
-
-#define CONFIG_CLK_1000_400_200
 
 /* MIU (Memory Interleaving Unit) */
 #define CONFIG_MIU_2BIT_21_7_INTERLEAVED
 
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KB */
 #define RESERVE_BLOCK_SIZE		(512)
 #define BL1_SIZE			(16 << 10) /*16 K reserved for BL1*/
-#define CONFIG_ENV_OFFSET		(RESERVE_BLOCK_SIZE + BL1_SIZE)
-
-#define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
-
-#define CONFIG_SYS_INIT_SP_ADDR		0x02040000
-
-/* U-Boot copy size from boot Media to DRAM.*/
-#define COPY_BL2_SIZE		0x80000
-#define BL2_START_OFFSET	((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
-#define BL2_SIZE_BLOC_COUNT	(COPY_BL2_SIZE/512)
 
 #endif	/* __CONFIG_H */