X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomapl138_lcdk.h;h=a344a46a3e66e15d5afe212e460401d4c23d5f7c;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=58fa5ccfa3efa242ab8e718360611d21958a8623;hpb=ea02cfb6495eb5f54bf239405316746a19d303b2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 58fa5cc..a344a46 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -17,25 +17,17 @@
 /*
  * SoC Configuration
  */
-#define CONFIG_MACH_OMAPL138_LCDK
-#define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 /*
  * Memory Info
  */
-#define CONFIG_SYS_MALLOC_LEN	(0x10000 + 1*1024*1024) /* malloc() len */
 #define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
 #define PHYS_SDRAM_1_SIZE	(128 << 20) /* SDRAM size 128MB */
 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
 
-#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE
-#define CONFIG_SPL_BSS_MAX_SIZE 0x1080000
-
 /* memtest start addr */
 
 /* memtest will be run on 16MB */
@@ -125,9 +117,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE	(2 << 10)
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	SZ_512K
 #define CONFIG_SYS_NAND_U_BOOT_DST	0xc1080000
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
@@ -140,35 +129,13 @@
 				22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \
 				38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
 				54, 55, 56, 57, 58, 59, 60, 61, 62, 63 }
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	10
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_LOAD
-#endif
-
-/*
- * Network & Ethernet Configuration
- */
-#ifdef CONFIG_DRIVER_TI_EMAC
-#undef	CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT	10
 #endif
 
 /*
  * U-Boot general configuration
  */
-#define CONFIG_BOOTFILE		"zImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
 
 /*
  * USB Configs
@@ -180,12 +147,6 @@
  * Linux Information
  */
 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTCOMMAND \
-		"run envboot; " \
-		"run mmcboot; "
 
 #define DEFAULT_LINUX_BOOT_ENV \
 	"loadaddr=0xc0700000\0" \
@@ -205,24 +166,12 @@
 	"boot_fit=0\0" \
 	"console=ttyS2,115200n8\0"
 
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
 /* SD/MMC */
 
 /* defines for SPL */
-#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
-						CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_STACK	0x8001ff00
-#define CONFIG_SPL_MAX_FOOTPRINT	32768
-#define CONFIG_SPL_PAD_TO	32768
 
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
-					GENERATED_GBL_DATA_SIZE)
 
 #include <asm/arch/hardware.h>