X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap5_uevm.h;h=df60b49c613065c3df18ad8a4a6b2f8bc6ce9373;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=3df502eda02e628d27980c7e5f904cc4b3392102;hpb=378ec0f8161d12df63016b7ad1e9415b4221b7dc;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 3df502e..df60b49 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -4,7 +4,7 @@
  * Sricharan R	  <r.sricharan@ti.com>
  *
  * Configuration settings for the TI EVM5430 board.
- * See omap5_common.h for omap5 common settings.
+ * See ti_omap5_common.h for omap5 common settings.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -12,30 +12,37 @@
 #ifndef __CONFIG_OMAP5_EVM_H
 #define __CONFIG_OMAP5_EVM_H
 
+#include <environment/ti/dfu.h>
+
+#ifndef CONFIG_SPL_BUILD
 /* Define the default GPT table for eMMC */
 #define PARTS_DEFAULT \
 	"uuid_disk=${uuid_gpt_disk};" \
 	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+#endif
+
+#define DFUARGS \
+	"dfu_bufsiz=0x10000\0" \
+	DFU_ALT_INFO_MMC \
+	DFU_ALT_INFO_EMMC \
+	DFU_ALT_INFO_RAM
 
-#include <configs/omap5_common.h>
+#include <configs/ti_omap5_common.h>
 
 #define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE
 #define CONFIG_BAUDRATE			115200
 
+#define CONFIG_MISC_INIT_R
 /* MMC ENV related defines */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		1	/* SLOT2: eMMC(1) */
+#define CONFIG_ENV_SIZE			(128 << 10)
 #define CONFIG_ENV_OFFSET		0xE0000
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_CMD_SAVEENV
 
 /* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
 #define CONFIG_HSMMC2_8BIT
 #define CONFIG_SUPPORT_EMMC_BOOT
 
@@ -46,11 +53,8 @@
 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
 
 /* USB UHH support options */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_HOST
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
@@ -58,9 +62,6 @@
 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
 
 /* Enabled commands */
-#define CONFIG_CMD_DHCP		/* DHCP Support			*/
-#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
-#define CONFIG_CMD_NFS		/* NFS support			*/
 
 /* USB Networking options */
 #define CONFIG_USB_HOST_ETHER
@@ -71,8 +72,7 @@
 /* Max time to hold reset on this board, see doc/README.omap-reset-time */
 #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC	16296
 
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT