X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_zoom2.h;h=dadca280c72490a7fbcbad370eda88ca3e926285;hb=6cbec7b3bafc9f63cead2cc264505bcca36a074a;hp=75ab98098cb515f0d0915b32762cf22e5ac5631c;hpb=9efe379a0eb127e616d780533a711f99b52ea64a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 75ab980..dadca28 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -29,17 +29,18 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3430		1	/* which is in a 3430 */
 #define CONFIG_OMAP3_ZOOM2	1	/* working with Zoom II */
 
+#define CONFIG_SDRC	/* The chip has SDRC controller */
+
 #include <asm/arch/cpu.h>	/* get chip and board defs */
 #include <asm/arch/omap3.h>
 
@@ -64,10 +65,9 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_ENV_SIZE			SZ_128K	/* Total Size Environment */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_128K)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 						/* initial data */
 /*
  * Hardware drivers
@@ -99,6 +99,9 @@
 #define CONFIG_OMAP3_MMC		1
 #define CONFIG_DOS_PARTITION		1
 
+/* DDR - I use Micron DDR */
+#define CONFIG_OMAP3_MICRON_DDR		1
+
 /* Status LED */
 #define CONFIG_STATUS_LED		1 /* Status LED enabled	*/
 #define CONFIG_BOARD_SPECIFIC_LED	1
@@ -123,6 +126,20 @@
 #define CONFIG_OMAP3_GPIO_3 /* board revision */
 #define CONFIG_OMAP3_GPIO_5 /* debug board detection, ZOOM2_LED_BLUE */
 
+/* USB */
+#define CONFIG_MUSB_UDC			1
+#define CONFIG_USB_OMAP3		1
+#define CONFIG_TWL4030_USB		1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE		1
+#define CONFIG_USB_TTY			1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID		0x0451
+#define CONFIG_USBD_PRODUCTID		0x5678
+#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME	"Zoom2"
+
 /* commands to include */
 #include <config_cmd_default.h>
 
@@ -165,11 +182,18 @@
 #define GPMC_NAND_ECC_LP_x16_LAYOUT	1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 /* Environment information */
 #define CONFIG_BOOTDELAY		10
 
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"usbtty=cdc_acm\0" \
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 /*
  * Miscellaneous configurable options
  */
@@ -201,10 +225,10 @@
  *
  * The stack sizes are set up in start.S using these settings
  */
-#define CONFIG_STACKSIZE	SZ_128K
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
 #ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	SZ_4K
-#define CONFIG_STACKSIZE_FIQ	SZ_4K
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -212,7 +236,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE	SZ_32M	/* at least 32 meg */
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
 
 /* SDRAM Bank Allocation method */
@@ -228,12 +252,11 @@
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 #define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
 
-#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
-						/* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CONFIG_SYS_MONITOR_LEN		SZ_256K	/* Reserve 2 sectors */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
-#define CONFIG_SYS_FLASH_BASE		boot_flash_base
+#if defined(CONFIG_CMD_NAND)
+#define CONFIG_SYS_FLASH_BASE		PISMO1_NAND_BASE
+#endif
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
@@ -241,24 +264,8 @@
 #define CONFIG_ENV_IS_IN_NAND		1
 #define SMNAND_ENV_OFFSET		0x0c0000 /* environment starts here */
 
-#define CONFIG_SYS_ENV_SECT_SIZE	boot_flash_sec
-#define CONFIG_ENV_OFFSET		boot_flash_off
+#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
+#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
-
-#ifndef __ASSEMBLY__
-extern struct gpmc *gpmc_cfg;
-extern unsigned int boot_flash_base;
-extern volatile unsigned int boot_flash_env_addr;
-extern unsigned int boot_flash_off;
-extern unsigned int boot_flash_sec;
-extern unsigned int boot_flash_type;
-#endif
-
 #endif /* __CONFIG_H */