X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_zoom2.h;h=3573edf105b0efcc6eedb1980c17538bc3110e89;hb=2cc195e0a5690bf022631ae420767e5b91c37476;hp=e2574192cf7bb612e17b3689ff2ef79415ca112c;hpb=3962c4f9fc4482a6547f3c3d3d5e986e625abb8a;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index e257419..3573edf 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -29,17 +29,18 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include /* * High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_ZOOM2 1 /* working with Zoom II */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include /* get chip and board defs */ #include @@ -61,14 +62,14 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* * Size of malloc() pool */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ - /* initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) /* * Hardware drivers */ @@ -99,6 +100,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* Status LED */ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED 1 @@ -115,6 +119,28 @@ /* Optional value */ #define STATUS_LED_BOOT STATUS_LED_BIT +/* GPIO banks */ +#ifdef CONFIG_STATUS_LED +#define CONFIG_OMAP3_GPIO_2 /* ZOOM2_LED_BLUE2 */ +#define CONFIG_OMAP3_GPIO_6 /* ZOOM2_LED_RED */ +#endif +#define CONFIG_OMAP3_GPIO_3 /* board revision */ +#define CONFIG_OMAP3_GPIO_5 /* debug board detection, ZOOM2_LED_BLUE */ + +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 +#define CONFIG_TWL4030_USB 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "Zoom2" + /* commands to include */ #include @@ -132,6 +158,7 @@ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 @@ -139,6 +166,12 @@ #define CONFIG_DRIVER_OMAP34XX_I2C 1 /* + * TWL4030 + */ +#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_LED 1 + +/* * Board NAND Info. */ #define CONFIG_NAND_OMAP_GPMC @@ -153,6 +186,15 @@ /* Environment information */ #define CONFIG_BOOTDELAY 10 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "usbtty=cdc_acm\0" \ + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) /* * Miscellaneous configurable options */ @@ -184,10 +226,10 @@ * * The stack sizes are set up in start.S using these settings */ -#define CONFIG_STACKSIZE SZ_128K +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K -#define CONFIG_STACKSIZE_FIQ SZ_4K +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ #endif /*----------------------------------------------------------------------- @@ -195,7 +237,7 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* SDRAM Bank Allocation method */ @@ -211,12 +253,11 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M -#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ - /* one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE boot_flash_base +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE @@ -224,25 +265,8 @@ #define CONFIG_ENV_IS_IN_NAND 1 #define SMNAND_ENV_OFFSET 0x0c0000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) - -#ifndef __ASSEMBLY__ -extern gpmc_csx_t *nand_cs_base; -extern gpmc_t *gpmc_cfg_base; -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif - #endif /* __CONFIG_H */