X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_zoom1.h;h=ef7a28bbc5a8e8a242805d8cd1fa1f8f5a3d9a46;hb=4b142febff71eabdb7ddbb125c7b583b24ddc434;hp=b544ea11d04032353c833cb49d2c1186f861a63b;hpb=488f5d8790c451fc527fe5d2ef218f2a5e40ea17;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index b544ea1..ef7a28b 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -28,7 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include /* * High Level Configuration Options @@ -42,6 +41,12 @@ #include /* get chip and board defs */ #include +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) @@ -57,9 +62,9 @@ /* * Size of malloc() pool */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ @@ -93,6 +98,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* commands to include */ #include @@ -113,6 +121,7 @@ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 @@ -120,6 +129,12 @@ #define CONFIG_DRIVER_OMAP34XX_I2C 1 /* + * TWL4030 + */ +#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_LED 1 + +/* * Board NAND Info. */ #define CONFIG_NAND_OMAP_GPMC @@ -132,19 +147,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define SECTORSIZE 512 - -#define NAND_ALLOW_ERASE_ALL -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 -#define NAND_NO_RB 1 -#define CONFIG_SYS_NAND_WP - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" @@ -171,7 +173,7 @@ "rootfstype=jffs2\0" \ "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ - "autoscr ${loadaddr}\0" \ + "source ${loadaddr}\0" \ "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ @@ -182,7 +184,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmcinit; then " \ + "if mmc init; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ @@ -220,24 +222,23 @@ /* load address */ /* - * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by - * 32KHz clk, or from external sig. This rate is divided by a local divisor. + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. */ -#define V_PVT 7 - -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ -#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT)) +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ #endif /*----------------------------------------------------------------------- @@ -245,7 +246,7 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* SDRAM Bank Allocation method */ @@ -264,7 +265,7 @@ #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ /* one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_SYS_FLASH_BASE boot_flash_base @@ -296,8 +297,7 @@ #define CONFIG_SYS_JFFS2_NUM_BANKS 1 #ifndef __ASSEMBLY__ -extern gpmc_csx_t *nand_cs_base; -extern gpmc_t *gpmc_cfg_base; +extern struct gpmc *gpmc_cfg; extern unsigned int boot_flash_base; extern volatile unsigned int boot_flash_env_addr; extern unsigned int boot_flash_off; @@ -305,21 +305,4 @@ extern unsigned int boot_flash_sec; extern unsigned int boot_flash_type; #endif - -#define WRITE_NAND_COMMAND(d, adr)\ - writel(d, &nand_cs_base->nand_cmd) -#define WRITE_NAND_ADDRESS(d, adr)\ - writel(d, &nand_cs_base->nand_adr) -#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat) -#define READ_NAND(adr) readl(&nand_cs_base->nand_dat) - -/* Other NAND Access APIs */ -#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \ - while (0) -#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \ - while (0) -#define NAND_DISABLE_CE(nand) -#define NAND_ENABLE_CE(nand) -#define NAND_WAIT_READY(nand) udelay(10) - #endif /* __CONFIG_H */