X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_zoom1.h;h=aa27a9e68a42af39e685a79e33730be42aa2fd7c;hb=04735a8fc45ba7c9f5b17d4837a0c649087b29e1;hp=7c5540ff6604ab736e4dc605e52e1acced591735;hpb=bcb879c0e37db1cf527ff408df93918f155012ea;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 7c5540f..aa27a9e 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -17,28 +17,19 @@
  * High Level Configuration Options
  */
 #define CONFIG_OMAP3_ZOOM1	1	/* working with Zoom MDK Rev1 */
-#define CONFIG_SYS_GENERIC_BOARD
 
 #define CONFIG_NAND
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #include <asm/arch/cpu.h>		/* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 #include <configs/ti_omap3_common.h>
 
 /* Remove SPL boot option - we do not support that on LDP yet */
-#undef CONFIG_SPL
 #undef CONFIG_SPL_FRAMEWORK
-#undef CONFIG_SPL_OS_BOOT
 
 /* Generic NAND definition conflicts with debug_base */
 #undef CONFIG_SYS_NAND_BASE
 
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_REVISION_TAG		1
@@ -50,14 +41,13 @@
  */
 
 /* USB */
-#define CONFIG_MUSB_UDC			1
+#define CONFIG_USB_MUSB_UDC			1
 #define CONFIG_USB_OMAP3		1
 #define CONFIG_TWL4030_USB		1
 
 /* USB device configuration */
 #define CONFIG_USB_DEVICE		1
 #define CONFIG_USB_TTY			1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
 /* Change these to suit your needs */
 #define CONFIG_USBD_VENDORID		0x0451
 #define CONFIG_USBD_PRODUCTID		0x5678
@@ -70,18 +60,15 @@
 					"4m(kernel),-(fs)"
 
 #if defined(CONFIG_CMD_NAND)
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS		0x240000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
+#endif
 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
 #endif
 
-#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
-#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
-#undef CONFIG_CMD_IMI		/* iminfo			*/
-#undef CONFIG_CMD_IMLS		/* List all found images	*/
-#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
-#define CONFIG_CMD_NFS		/* NFS support			*/
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
 #undef CONFIG_SYS_I2C_OMAP24XX
 #define CONFIG_SYS_I2C_OMAP34XX
 
@@ -98,6 +85,7 @@
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 
 /* Environment information */
 
@@ -164,13 +152,8 @@
  */
 
 /* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
-
 #if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE		PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE		NAND_BASE
 #endif
 
 /* Monitor at start of flash */
@@ -185,8 +168,6 @@
 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
-#define CONFIG_SYS_CACHELINE_SIZE	64
-
 #ifdef CONFIG_CMD_NET
 /* Ethernet (LAN9211 from SMSC9118 family) */
 #define CONFIG_SMC911X