X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_zoom1.h;h=24884b26fb9a554771b527ec646f6b8752058e05;hb=5fdb3c0e7ee6bac6b8809ae69e52f16d22d45035;hp=0f28278fc2223a71cb36bb3d7e52f57b46d9a914;hpb=c20ae2ffaa8b0c7b294330165a172d0f1dfe6dae;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 0f28278..24884b2 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2006-2008
  * Texas Instruments.
@@ -6,87 +7,52 @@
  * Nishanth Menon <nm@ti.com>
  *
  * Configuration settings for the TI OMAP3430 Zoom MDK board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP3_ZOOM1	1	/* working with Zoom MDK Rev1 */
-
-#define CONFIG_NAND
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap.h>
 #include <configs/ti_omap3_common.h>
 
 /* Remove SPL boot option - we do not support that on LDP yet */
-#undef CONFIG_SPL_FRAMEWORK
 
 /* Generic NAND definition conflicts with debug_base */
 #undef CONFIG_SYS_NAND_BASE
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_REVISION_TAG		1
 
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-
 /*
  * Hardware drivers
  */
 
-/* USB */
-#define CONFIG_USB_MUSB_UDC			1
-#define CONFIG_USB_OMAP3		1
-#define CONFIG_TWL4030_USB		1
-
 /* USB device configuration */
 #define CONFIG_USB_DEVICE		1
 #define CONFIG_USB_TTY			1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
 /* Change these to suit your needs */
 #define CONFIG_USBD_VENDORID		0x0451
 #define CONFIG_USBD_PRODUCTID		0x5678
 #define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
 #define CONFIG_USBD_PRODUCT_NAME	"Zoom1"
 
-#define MTDIDS_DEFAULT			"nand0=nand"
-#define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
-					"1920k(u-boot),128k(u-boot-env),"\
-					"4m(kernel),-(fs)"
-
 #if defined(CONFIG_CMD_NAND)
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS		0x240000
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
-#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
 #endif
-#define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
 #endif
 
-#undef CONFIG_SYS_I2C_OMAP24XX
-#define CONFIG_SYS_I2C_OMAP34XX
-
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED		1
 
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 
 /* Environment information */
 
@@ -144,9 +110,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1)	/* memtest */
-#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_2 + \
-					0x01F00000) /* 31MB */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -161,20 +124,8 @@
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
 
-#define CONFIG_ENV_IS_IN_NAND		1
 #define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
-#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
 
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
-
-#ifdef CONFIG_CMD_NET
-/* Ethernet (LAN9211 from SMSC9118 family) */
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE		DEBUG_BASE
-
-#endif
 
 #endif				/* __CONFIG_H */