X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_pandora.h;h=82c66c4b8c45778e9f368d57972bd6855e393d49;hb=4862830b696a6d0750e19d32a82553cdb41a85f8;hp=efee5b0c3f1ae61c7afa4c30e8f469ccf889fa34;hpb=68ccab51936d92551e3e65944af172ad64ca2ca9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index efee5b0..82c66c4 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -1,24 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2008-2010
  * Gražvydas Ignotas <notasas@gmail.com>
  *
  * Configuration settings for the OMAP3 Pandora.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define CONFIG_NAND
-
 /* override base for compatibility with MLO the device ships with */
-#define CONFIG_SYS_TEXT_BASE		0x80008000
 
 #include <configs/ti_omap3_common.h>
 
-#define CONFIG_MISC_INIT_R
 #define CONFIG_REVISION_TAG		1
 
 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
@@ -26,53 +20,12 @@
 #define CONFIG_SYS_DEVICE_NULLDEV	1
 
 /*
- * Hardware drivers
- */
-
-/* I2C Support */
-#define CONFIG_SYS_I2C_OMAP34XX
-
-/* TWL4030 LED */
-#define CONFIG_TWL4030_LED
-
-/*
- * NS16550 Configuration
- */
-#undef CONFIG_SYS_NS16550_CLK
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3
-
-/* commands to include */
-
-/*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_SW
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
 #define CONFIG_SYS_NAND_OOBSIZE		64
 
-#ifdef CONFIG_NAND
-#define CONFIG_CMD_UBIFS	/* Read-only UBI volume operations */
-
-#define CONFIG_RBTREE		/* required by CONFIG_CMD_UBI */
-#define CONFIG_LZO		/* required by CONFIG_CMD_UBIFS */
-
-#define CONFIG_MTD_PARTITIONS	/* required for UBI partition support */
-
-#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:512k(xloader),"\
-					"1920k(uboot),128k(uboot-env),"\
-					"10m(boot),-(rootfs)"
-#else
-#define MTDPARTS_DEFAULT
-#endif
-
 
 #define CONFIG_BOOTCOMMAND \
 	"run distro_bootcmd; " \
@@ -93,7 +46,7 @@
 	"usbtty=cdc_acm\0" \
 	"bootargs_ubi=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
 		"rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	BOOTENV \
 
 /* memtest works on */
@@ -108,11 +61,9 @@
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CONFIG_ENV_IS_IN_NAND		1
-#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
 
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
+#define CONFIG_ENV_OFFSET		0x260000
+#define CONFIG_ENV_ADDR			0x260000
 
 #endif				/* __CONFIG_H */