X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_overo.h;h=ea941dbb81abc012c55ed3cdcdce2f6d304cc0d7;hb=f89d6133eef2e068f9c33853b6584d7fcbfa9d2e;hp=53ff61d10c1f3d655508a4b7ff0f7c1c844e234a;hpb=fcd78fa604d994477fd209b9faab4a974b103250;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 53ff61d..ea941db 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -1,29 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the Gumstix Overo board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define CONFIG_NAND
-
 #include <configs/ti_omap3_common.h>
-#undef CONFIG_SPL_MAX_SIZE
-#define CONFIG_SPL_MAX_SIZE	(64*1024)
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE	0x40200000
-
-#define CONFIG_BCH
-
-/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+/*
+ * We are only ever GP parts and will utilize all of the "downloaded image"
+ * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
+ */
 
 /* call misc_init_r */
-#define CONFIG_MISC_INIT_R
 
 /* pass the revision tag */
 #define CONFIG_REVISION_TAG
@@ -36,38 +25,15 @@
 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + (128 << 15))
 
 /* I2C Support */
-#define CONFIG_SYS_I2C_OMAP34XX
 
 /* TWL4030 LED */
-#define CONFIG_TWL4030_LED
 
 /* USB EHCI */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_STORAGE
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	183
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-
-/* Initialize GPIOs by default */
-#define CONFIG_OMAP3_GPIO_2	/* GPIO32..63 is in GPIO Bank 2 */
-#define CONFIG_OMAP3_GPIO_3	/* GPIO64..95 is in GPIO Bank 3 */
-#define CONFIG_OMAP3_GPIO_4	/* GPIO96..127 is in GPIO Bank 4 */
-#define CONFIG_OMAP3_GPIO_5	/* GPIO128..159 is in GPIO Bank 5 */
-#define CONFIG_OMAP3_GPIO_6	/* GPIO160..191 is in GPIO Bank 6 */
 
 /* commands to include */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_USB
 
 #ifdef CONFIG_NAND
-#define CONFIG_CMD_UBI		/* UBI-formated MTD partition support */
-#define CONFIG_CMD_UBIFS	/* Read-only UBI volume operations */
-
-#define CONFIG_RBTREE		/* required by CONFIG_CMD_UBI */
-#define CONFIG_LZO		/* required by CONFIG_CMD_UBIFS */
-
-#define CONFIG_MTD_PARTITIONS	/* required for UBI partition support */
-
 /* NAND block size is 128 KiB.  Synchronize these values with
  * overo_nand_partitions in mach-omap2/board-overo.c in Linux:
  *  xloader              4 * NAND_BLOCK_SIZE = 512 KiB
@@ -76,21 +42,9 @@
  *  linux               64 * NAND_BLOCK_SIZE = 8 MiB
  *  rootfs              remainder
  */
-#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:"	\
-	"512k(xloader),"				\
-	"1792k(u-boot),"				\
-	"256k(environ),"				\
-	"8m(linux),"					\
-	"-(rootfs)"
-#else /* CONFIG_NAND */
-#define MTDPARTS_DEFAULT
 #endif /* CONFIG_NAND */
 
 /* Board NAND Info. */
-#define CONFIG_SYS_NAND_QUIET_TEST
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 /* Environment information */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
@@ -108,7 +62,7 @@
 	"mmcrootfstype=ext4 rootwait\0" \
 	"nandroot=ubi0:rootfs ubi.mtd=4\0" \
 	"nandrootfstype=ubifs\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"mmcargs=setenv bootargs console=${console} " \
 		"${optargs} " \
 		"mpurate=${mpurate} " \
@@ -200,28 +154,16 @@
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
 
-#define CONFIG_ENV_IS_IN_NAND
 #define ONENAND_ENV_OFFSET		0x240000 /* environment starts here */
-#define SMNAND_ENV_OFFSET		0x240000 /* environment starts here */
-
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
-
-/* Configure SMSC9211 ethernet */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE		0x2C000000
-#endif /* (CONFIG_CMD_NET) */
+#define CONFIG_ENV_OFFSET		0x240000
+#define CONFIG_ENV_ADDR			0x240000
 
 /* Initial RAM setup */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
 #define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_CACHELINE_SIZE	64
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_MAX_ECCPOS  56
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
@@ -242,9 +184,7 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS		0x240000
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
-#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
 #endif
 
 #endif				/* __CONFIG_H */