X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_overo.h;h=007e27f9f1185df13ee15b18b51624499536c01d;hb=a7e36fc95fa2c915bb95e845c8945ca926575f5b;hp=f6d6f75fca42a76804ab1767d1a7d279f1657905;hpb=cec2655c3b3b86f14a6a5c2cbb01833f7e3974be;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index f6d6f75..007e27f 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -1,19 +1,7 @@
 /*
  * Configuration settings for the Gumstix Overo board.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -26,6 +14,7 @@
 #define CONFIG_OMAP34XX				/* which is a 34XX */
 #define CONFIG_OMAP3_OVERO			/* working with overo */
 #define CONFIG_OMAP_GPIO
+#define CONFIG_OMAP_COMMON
 
 #define CONFIG_SDRC				/* The chip has SDRC controller */
 
@@ -109,11 +98,10 @@
 #define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
@@ -131,8 +119,6 @@
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand */
 							/* at CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT
-
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
 						/* devices */
 #define CONFIG_JFFS2_NAND
@@ -188,7 +174,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
@@ -228,7 +214,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -319,6 +304,9 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
@@ -334,6 +322,7 @@
 						10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000