X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_logic.h;h=dd0ea2dbde2ab76ce51825c59b02479e96ff38eb;hb=19ea606109135c3d9892d86e1b1c2a8fb551cc1b;hp=d39546f15ca25367dd04d3a3cfcbd4a18357eea1;hpb=ab5814f9926d8085d69df033d5db13bf0078c1f1;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index d39546f..dd0ea2d 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -12,8 +12,6 @@
 
 /* High Level Configuration Options */
 
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-
 #include <configs/ti_omap3_common.h>
 
 /*
@@ -21,10 +19,7 @@
  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
  * order to allow for BCH8 to fit in.
  */
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE		0x40200000
 
-#define CONFIG_MISC_INIT_R		/* misc_init_r dumps the die id */
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -35,8 +30,15 @@
 /* I2C */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM AT24C64      */
 
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_USB_EHCI_OMAP
+#endif
+#ifdef CONFIG_USB_EHCI_OMAP
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	4
+#endif
+
 /* Board NAND Info. */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	  /* Max number of */
 						  /* NAND devices */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -61,16 +63,12 @@
 
 /* Environment information */
 
-#define CONFIG_PREBOOT \
-	"setenv preboot;"						\
-	"saveenv;"
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
 	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"	\
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
 	"mmcrootfstype=ext4 rootwait\0" \
 	"nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
 	"nandrootfstype=ubifs rootwait\0" \
@@ -109,7 +107,8 @@
 	"ramargs=setenv bootargs "\
 		"root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
 	"mmcargs=setenv bootargs "\
-		"root=${mmcroot} rootfstype=${mmcrootfstype}\0" \
+		"root=PARTUUID=${uuid} " \
+		"rootfstype=${mmcrootfstype} rw\0" \
 	"nandargs=setenv bootargs "\
 		"root=${nandroot} " \
 		"rootfstype=${nandrootfstype}\0" \
@@ -119,9 +118,11 @@
 		"ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
 	"nfsrootpath=/opt/nfs-exports/omap\0" \
 	"autoload=no\0" \
+	"fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 	"loadfdt=mmc rescan; " \
 		"load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
 	"mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
+		"run finduuid; "\
 		"run mmcargs; " \
 		"run common_bootargs; " \
 		"run dump_bootargs; " \
@@ -177,25 +178,23 @@
 /* Miscellaneous configurable options */
 
 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
-					0x01F00000) /* 31MB */
 
 /* FLASH and environment organization */
 
 /* **** PISMO SUPPORT *** */
 #if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE		NAND_BASE
+#define CONFIG_SYS_FLASH_BASE		0x10000000
 #endif
 
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_SIZE		0x4000000
+
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_ENV_OFFSET		0x260000
-#define CONFIG_ENV_ADDR			0x260000
 
 /* Defines for SPL */