X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_logic.h;h=6e8afbf81f8e0b86c4356967923176e6e9f7d6e8;hb=2be296538e2e9d2893dc495b3fc8f9f6acb1454c;hp=90faaf433ed556aae525d8dda04feda25a8c3de6;hpb=476e16e87e2e554627bcd771f8e557f7be3ca1f3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 90faaf4..6e8afbf 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -17,15 +17,31 @@
 
 #include <configs/ti_omap3_common.h>
 
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Disable MMC DM for SPL build and can be re-enabled after adding
+ * DM support in SPL
+ */
+#undef CONFIG_DM_MMC
+#undef CONFIG_DM_MMC_OPS
+#undef OMAP_HSMMC_USE_GPIO
+
+/* select serial console configuration for SPL */
+#undef CONFIG_CONS_INDEX
+#define CONFIG_CONS_INDEX              1
+#define CONFIG_SYS_NS16550_COM1                OMAP34XX_UART1
+#endif
+
+
 /*
  * We are only ever GP parts and will utilize all of the "downloaded image"
  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
  * order to allow for BCH8 to fit in.
  */
 #undef CONFIG_SPL_TEXT_BASE
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40200000
 
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MISC_INIT_R		/* misc_init_r dumps the die id */
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -34,27 +50,15 @@
 
 /* Hardware drivers */
 
-/* GPIO banks */
-#define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
-
 #define CONFIG_USB_OMAP3
 
-/* select serial console configuration */
-#undef CONFIG_CONS_INDEX
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
-#define CONFIG_SERIAL1			1	/* UART1 on OMAP Logic boards */
-
 /* commands to include */
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND_LOCK_UNLOCK	/* nand (un)lock commands	*/
 
 /* I2C */
 #define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM AT24C64      */
-#define EXPANSION_EEPROM_I2C_BUS	2	/* I2C Bus for AT24C64 */
-#define CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID
 
 /* USB */
 #define CONFIG_USB_MUSB_OMAP2PLUS
@@ -75,10 +79,6 @@
 #ifdef CONFIG_NAND
 #define CONFIG_NAND_OMAP_GPMC
 
-#define CONFIG_CMD_UBIFS		/* Read-only UBI volume operations */
-#define CONFIG_RBTREE			/* required by CONFIG_CMD_UBI */
-#define CONFIG_LZO			/* required by CONFIG_CMD_UBIFS */
-
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE /* physical address */
 						  /* to access nand */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	  /* Max number of */
@@ -249,7 +249,6 @@
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CONFIG_ENV_IS_IN_NAND		1
 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 #define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */