X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_igep00x0.h;h=93d36353ffb0e75bc7f6636fdae15f1021536ea5;hb=4db386655a889b6466d2c3f40839ad21205c6d21;hp=a029b54804d730f897254d8c2743f3da271f4ff4;hpb=5bbc265becbec9ce1e489760eb34922ac8c0bed9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index a029b54..93d3635 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -1,57 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common configuration settings for IGEP technology based boards
  *
  * (C) Copyright 2012
  * ISEE 2007 SL, <www.iseebcn.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __IGEP00X0_H
 #define __IGEP00X0_H
 
-#define CONFIG_NR_DRAM_BANKS            2
-
 #include <configs/ti_omap3_common.h>
-#include <asm/mach-types.h>
 
 /*
  * We are only ever GP parts and will utilize all of the "downloaded image"
  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  */
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE		0x40200000
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_REVISION_TAG		1
 
-/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
-		       (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
-#define RED_LED_GPIO 27
-#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define RED_LED_GPIO 16
-#endif
-#endif
+/* TPS65950 */
+#define PBIASLITEVMODE1			(1 << 8)
 
-/* USB */
-#define CONFIG_USB_MUSB_UDC		1
-#define CONFIG_USB_OMAP3		1
-#define CONFIG_TWL4030_USB		1
+/* LED */
+#define IGEP0020_GPIO_LED		27
+#define IGEP0030_GPIO_LED		16
 
-/* USB device configuration */
-#define CONFIG_USB_DEVICE		1
-#define CONFIG_USB_TTY			1
-
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID		0x0451
-#define CONFIG_USBD_PRODUCTID		0x5678
-#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME	"IGEP"
-
-#ifndef CONFIG_SPL_BUILD
+/* Board and revision detection GPIOs */
+#define IGEP0030_USB_TRANSCEIVER_RESET		54
+#define GPIO_IGEP00X0_BOARD_DETECTION		28
+#define GPIO_IGEP00X0_REVISION_DETECTION	129
 
 /* Environment */
 #define ENV_DEVICE_SETTINGS \
@@ -69,72 +44,40 @@
 
 #include <config_distro_bootcmd.h>
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define ENV_FINDFDT \
+	"findfdt="\
+		"if test ${board_name} = igep0020; then " \
+			"if test ${board_rev} = F; then " \
+				"setenv fdtfile omap3-igep0020-rev-f.dtb; " \
+			"else " \
+				"setenv fdtfile omap3-igep0020.dtb; fi; fi; " \
+		"if test ${board_name} = igep0030; then " \
+			"if test ${board_rev} = G; then " \
+				"setenv fdtfile omap3-igep0030-rev-g.dtb; " \
+			"else " \
+				"setenv fdtfile omap3-igep0030.dtb; fi; fi; " \
+		"if test ${fdtfile} = ''; then " \
+			"echo WARNING: Could not determine device tree to use; fi; \0"
+
+#define CFG_EXTRA_ENV_SETTINGS \
+	ENV_FINDFDT \
 	ENV_DEVICE_SETTINGS \
 	MEM_LAYOUT_SETTINGS \
 	BOOTENV
 
-#endif
-
-/*
- * SMSC911x Ethernet
- */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE		0x2C000000
-#endif /* (CONFIG_CMD_NET) */
-
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_SYS_MTDPARTS_RUNTIME
-
 /* OneNAND config */
-#define CONFIG_USE_ONENAND_BOARD_INIT
-#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
-#define CONFIG_SYS_ONENAND_BLOCK_SIZE	(128*1024)
+#define CFG_SYS_ONENAND_BASE		ONENAND_MAP
+#define CFG_SYS_ONENAND_BLOCK_SIZE	(128*1024)
 
 /* NAND config */
-#define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, \
+#define CFG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
 					 26, 27, 28, 29, 30, 31, 32, 33, \
 					 34, 35, 36, 37, 38, 39, 40, 41, \
 					 42, 43, 44, 45, 46, 47, 48, 49, \
 					 50, 51, 52, 53, 54, 55, 56, 57, }
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_BCH
-
-/* UBI configuration */
-#define CONFIG_SPL_UBI			1
-#define CONFIG_SPL_UBI_MAX_VOL_LEBS	256
-#define CONFIG_SPL_UBI_MAX_PEB_SIZE	(256*1024)
-#define CONFIG_SPL_UBI_MAX_PEBS		4096
-#define CONFIG_SPL_UBI_VOL_IDS		8
-#define CONFIG_SPL_UBI_LOAD_MONITOR_ID	0
-#define CONFIG_SPL_UBI_LOAD_KERNEL_ID	3
-#define CONFIG_SPL_UBI_LOAD_ARGS_ID	4
-#define CONFIG_SPL_UBI_PEB_OFFSET	4
-#define CONFIG_SPL_UBI_VID_OFFSET	512
-#define CONFIG_SPL_UBI_LEB_START	2048
-#define CONFIG_SPL_UBI_INFO_ADDR	0x88080000
-
-/* environment organization */
-#define CONFIG_ENV_UBI_PART		"UBI"
-#define CONFIG_ENV_UBI_VOLUME		"config"
-#define CONFIG_ENV_UBI_VOLUME_REDUND	"config_r"
-#define CONFIG_UBI_SILENCE_MSG		1
-#define CONFIG_UBIFS_SILENCE_MSG	1
-#define CONFIG_ENV_SIZE			(32*1024)
+#define CFG_SYS_NAND_ECCSIZE		512
+#define CFG_SYS_NAND_ECCBYTES	14
 
 #endif /* __IGEP00X0_H */