X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_igep00x0.h;h=006c9a9c0daa29422af9485ad0b7ab1c69f29081;hb=HEAD;hp=5da50a50948a43b4e17453340ed5f9d157da7d66;hpb=f4c6f9335c1e867862dcebcfa9c05b2e3dd05636;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 5da50a5..93d3635 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -1,79 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Common configuration settings for IGEP technology based boards * * (C) Copyright 2012 * ISEE 2007 SL, - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __IGEP00X0_H #define __IGEP00X0_H -#ifdef CONFIG_BOOT_NAND -#define CONFIG_NAND -#endif - -#define CONFIG_NR_DRAM_BANKS 2 - #include -#include /* - * Display CPU and Board information + * We are only ever GP parts and will utilize all of the "downloaded image" + * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -#define CONFIG_MISC_INIT_R - -#define CONFIG_REVISION_TAG 1 - -/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */ -#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032) -#define CONFIG_STATUS_LED -#define CONFIG_BOARD_SPECIFIC_LED -#define CONFIG_GPIO_LED -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) -#define RED_LED_GPIO 27 -#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) -#define RED_LED_GPIO 16 -#else -#error "status LED not defined for this machine." -#endif -#define RED_LED_DEV 0 -#define STATUS_LED_BIT RED_LED_GPIO -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BOOT RED_LED_DEV -#endif -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */ -#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ +/* TPS65950 */ +#define PBIASLITEVMODE1 (1 << 8) -/* USB */ -#define CONFIG_USB_MUSB_UDC 1 -#define CONFIG_USB_OMAP3 1 -#define CONFIG_TWL4030_USB 1 +/* LED */ +#define IGEP0020_GPIO_LED 27 +#define IGEP0030_GPIO_LED 16 -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 - -/* Change these to suit your needs */ -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "IGEP" - -#ifdef CONFIG_BOOT_ONENAND -#define CONFIG_CMD_ONENAND /* ONENAND support */ -#endif - -#ifndef CONFIG_SPL_BUILD +/* Board and revision detection GPIOs */ +#define IGEP0030_USB_TRANSCEIVER_RESET 54 +#define GPIO_IGEP00X0_BOARD_DETECTION 28 +#define GPIO_IGEP00X0_REVISION_DETECTION 129 /* Environment */ #define ENV_DEVICE_SETTINGS \ @@ -91,83 +44,40 @@ #include -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define ENV_FINDFDT \ + "findfdt="\ + "if test ${board_name} = igep0020; then " \ + "if test ${board_rev} = F; then " \ + "setenv fdtfile omap3-igep0020-rev-f.dtb; " \ + "else " \ + "setenv fdtfile omap3-igep0020.dtb; fi; fi; " \ + "if test ${board_name} = igep0030; then " \ + "if test ${board_rev} = G; then " \ + "setenv fdtfile omap3-igep0030-rev-g.dtb; " \ + "else " \ + "setenv fdtfile omap3-igep0030.dtb; fi; fi; " \ + "if test ${fdtfile} = ''; then " \ + "echo WARNING: Could not determine device tree to use; fi; \0" + +#define CFG_EXTRA_ENV_SETTINGS \ + ENV_FINDFDT \ ENV_DEVICE_SETTINGS \ MEM_LAYOUT_SETTINGS \ BOOTENV -#endif - -/* - * FLASH and environment organization - */ - -#ifdef CONFIG_BOOT_ONENAND -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ +/* OneNAND config */ +#define CFG_SYS_ONENAND_BASE ONENAND_MAP +#define CFG_SYS_ONENAND_BLOCK_SIZE (128*1024) -#define CONFIG_ENV_IS_IN_ONENAND 1 -#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */ -#define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET -#endif - -#ifdef CONFIG_NAND -#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */ -#define CONFIG_ENV_ADDR NAND_ENV_OFFSET -#endif - -/* - * SMSC911x Ethernet - */ -#if defined(CONFIG_CMD_NET) -#define CONFIG_SMC911X -#define CONFIG_SMC911X_32_BIT -#define CONFIG_SMC911X_BASE 0x2C000000 -#endif /* (CONFIG_CMD_NET) */ - -/* OneNAND boot config */ -#ifdef CONFIG_BOOT_ONENAND -#define CONFIG_SPL_ONENAND_SUPPORT -#define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000 -#define CONFIG_SYS_ONENAND_PAGE_SIZE 2048 -#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x80000 -#define CONFIG_SPL_ONENAND_LOAD_SIZE \ - (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR) - -#endif - -/* NAND boot config */ -#ifdef CONFIG_NAND -#define CONFIG_SYS_NAND_BUSWIDTH_16BIT -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ +/* NAND config */ +#define CFG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ 18, 19, 20, 21, 22, 23, 24, 25, \ 26, 27, 28, 29, 30, 31, 32, 33, \ 34, 35, 36, 37, 38, 39, 40, 41, \ 42, 43, 44, 45, 46, 47, 48, 49, \ 50, 51, 52, 53, 54, 55, 56, 57, } -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_BCH - -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 -#endif -#endif +#define CFG_SYS_NAND_ECCSIZE 512 +#define CFG_SYS_NAND_ECCBYTES 14 #endif /* __IGEP00X0_H */