X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_evm.h;h=d8ca6225d6e6c8d522a290c71a6cfe44e811ac25;hb=4125bbcef6a998ce8580a1f5c53c8c93a56a125b;hp=52a24d37b882b31108ac24049cbf7ffa246f91ff;hpb=7edb17670cdca0ee5de8b8eb61753ad6b7fc33e6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 52a24d3..d8ca622 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -35,10 +35,6 @@
  */
 #define CONFIG_SYS_LONGHELP
 
-/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
@@ -50,22 +46,11 @@
  * ----------------------------------------------------------------------------
  */
 
-/* MMC */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_OMAP_HSMMC
-
 /* SPL */
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 /* Partition tables */
-#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
 
 /* USB
  *
@@ -78,7 +63,6 @@
 
 /* NAND SPL */
 #define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
@@ -99,19 +83,9 @@
 /*
  * High level configuration options
  */
-#define CONFIG_OMAP			/* This is TI OMAP core */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SDRC			/* The chip has SDRC controller */
 
-#define CONFIG_OMAP3_EVM		/* This is a OMAP3 EVM */
-#define CONFIG_TWL4030_POWER		/* with TWL4030 PMIC */
-
 /*
  * Clock related definitions
  */
@@ -169,7 +143,6 @@
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SERIAL1			1	/* UART1 on OMAP3 EVM */
 #define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
 
@@ -234,9 +207,6 @@
 
 #ifdef CONFIG_USB_MUSB_HCD
 
-#define CONFIG_USB_STORAGE
-#define CONGIG_CMD_STORAGE
-
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT			"usb start"
@@ -248,7 +218,6 @@
 /* USB device configuration */
 #define CONFIG_USB_DEVICE
 #define CONFIG_USB_TTY
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* Change these to suit your needs */
 #define CONFIG_USBD_VENDORID		0x0451
@@ -335,30 +304,22 @@
  * Board specific
  * -----------------------------------------------------------------------------
  */
-#define CONFIG_SYS_NO_FLASH
 
 /* Uncomment to define the board revision statically */
 /* #define CONFIG_STATIC_BOARD_REV	OMAP3EVM_BOARD_GEN_2 */
 
-#define CONFIG_SYS_CACHELINE_SIZE	64
-
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40200800
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
 
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM