X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_evm.h;h=53bfc1326437560555b922e839cf88d4152a9cce;hb=b8682a7fcf69344ac5a2d57c75f9c93bfdc93142;hp=0dd63df00c2032b65f6d9e9eb2b79823481d8266;hpb=711b534120c0a5f73cdb9a25eb91f9aa0c5e09ab;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 0dd63df..53bfc13 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -25,8 +25,6 @@
  * ----------------------------------------------------------------------------
  */
 
-#define CONFIG_CMD_JFFS2
-
 #define CONFIG_CMD_NAND
 
 /* ----------------------------------------------------------------------------
@@ -46,20 +44,11 @@
  * ----------------------------------------------------------------------------
  */
 
-/* MMC */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_OMAP_HSMMC
-
 /* SPL */
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 /* Partition tables */
-#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
 
 /* USB
  *
@@ -92,19 +81,9 @@
 /*
  * High level configuration options
  */
-#define CONFIG_OMAP			/* This is TI OMAP core */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SDRC			/* The chip has SDRC controller */
 
-#define CONFIG_OMAP3_EVM		/* This is a OMAP3 EVM */
-#define CONFIG_TWL4030_POWER		/* with TWL4030 PMIC */
-
 /*
  * Clock related definitions
  */
@@ -162,7 +141,6 @@
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SERIAL1			1	/* UART1 on OMAP3 EVM */
 #define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
 
@@ -227,8 +205,6 @@
 
 #ifdef CONFIG_USB_MUSB_HCD
 
-#define CONGIG_CMD_STORAGE
-
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT			"usb start"
@@ -240,7 +216,6 @@
 /* USB device configuration */
 #define CONFIG_USB_DEVICE
 #define CONFIG_USB_TTY
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* Change these to suit your needs */
 #define CONFIG_USBD_VENDORID		0x0451
@@ -327,7 +302,6 @@
  * Board specific
  * -----------------------------------------------------------------------------
  */
-#define CONFIG_SYS_NO_FLASH
 
 /* Uncomment to define the board revision statically */
 /* #define CONFIG_STATIC_BOARD_REV	OMAP3EVM_BOARD_GEN_2 */
@@ -341,9 +315,8 @@
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM