X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_cairo.h;h=9e2b7523e5d1b63fe74bfa2cb7a427aba732318d;hb=e4b91f085d4259f187052ff724c80af38fc11b18;hp=5f9f8156fd6bea38364326954e15dc64beab2bac;hpb=203dc1b3a8ea79190c8574c58b75a8aa5e5d9d1e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h
index 5f9f815..9e2b752 100644
--- a/include/configs/omap3_cairo.h
+++ b/include/configs/omap3_cairo.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the QUIPOS Cairo board.
  *
@@ -13,15 +14,11 @@
  *	Syed Mohammed Khasim <khasim@ti.com>
  *
  * Also derived from include/configs/omap3_beagle.h
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __OMAP3_CAIRO_CONFIG_H
 #define __OMAP3_CAIRO_CONFIG_H
 
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  * 64 bytes before this address should be set aside for u-boot.img's
@@ -29,19 +26,14 @@
  * other needs.  We use this rather than the inherited defines from
  * ti_armv7_common.h for backwards compatibility.
  */
-#define CONFIG_SYS_TEXT_BASE		0x80100000
 #define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		(512 << 10)	/* 512 KB */
 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 
-#define CONFIG_NAND
-
 #include <configs/ti_omap3_common.h>
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_REVISION_TAG		1
 #define CONFIG_ENV_OVERWRITE
 
@@ -51,17 +43,13 @@
 /* Probe all devices */
 #define CONFIG_SYS_I2C_NOPROBES		{ {0x0, 0x0} }
 
-#define CONFIG_NAND
-
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED		1
 
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -172,18 +160,10 @@
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
 
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
-#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
-
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
-
-#define CONFIG_OMAP3_SPI
+#define CONFIG_ENV_ADDR			0x260000
 
 /* Defines for SPL */
-#define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -201,28 +181,11 @@
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
-#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
 #endif
 
 /* env defaults */
 #define CONFIG_BOOTFILE			"uImage"
 
-/* Override OMAP3 common serial console configuration from UART3
- * to UART2.
- *
- * Attention: for UART2, special MUX settings (MUX_DEFAULT(), MCBSP3)
- * are needed and peripheral clocks for UART2 must be enabled in
- * function per_clocks_enable().
- */
-#undef CONFIG_CONS_INDEX
-#define CONFIG_CONS_INDEX		2
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_SYS_NS16550_COM3
-#define CONFIG_SYS_NS16550_COM2		OMAP34XX_UART2
-#undef CONFIG_SERIAL3
-#define CONFIG_SERIAL2
-#endif
-
 /* Provide the MACH_TYPE value the vendor kernel requires */
 #define CONFIG_MACH_TYPE	3063