X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_cairo.h;h=481cad5523141001d410d9ad198d9f360d5babbb;hb=8ccf98b1cfd2811e3121c719e294bdd8ebab1c45;hp=729bcc74eb2bbf2abf2cb24495981f913da61367;hpb=5bbc265becbec9ce1e489760eb34922ac8c0bed9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h
index 729bcc7..481cad5 100644
--- a/include/configs/omap3_cairo.h
+++ b/include/configs/omap3_cairo.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the QUIPOS Cairo board.
  *
@@ -13,15 +14,11 @@
  *	Syed Mohammed Khasim <khasim@ti.com>
  *
  * Also derived from include/configs/omap3_beagle.h
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __OMAP3_CAIRO_CONFIG_H
 #define __OMAP3_CAIRO_CONFIG_H
 
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  * 64 bytes before this address should be set aside for u-boot.img's
@@ -29,7 +26,6 @@
  * other needs.  We use this rather than the inherited defines from
  * ti_armv7_common.h for backwards compatibility.
  */
-#define CONFIG_SYS_TEXT_BASE		0x80100000
 #define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		(512 << 10)	/* 512 KB */
@@ -38,8 +34,6 @@
 
 #include <configs/ti_omap3_common.h>
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_REVISION_TAG		1
 #define CONFIG_ENV_OVERWRITE
 
@@ -57,7 +51,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -170,16 +163,12 @@
 
 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 #define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
-#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
 
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
-
-#define CONFIG_OMAP3_SPI
+#define CONFIG_ENV_OFFSET		0x260000
+#define CONFIG_ENV_ADDR			0x260000
 
 /* Defines for SPL */
-#define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -209,11 +198,7 @@
  * are needed and peripheral clocks for UART2 must be enabled in
  * function per_clocks_enable().
  */
-#undef CONFIG_CONS_INDEX
-#define CONFIG_CONS_INDEX		2
 #ifdef CONFIG_SPL_BUILD
-#undef CONFIG_SYS_NS16550_COM3
-#define CONFIG_SYS_NS16550_COM2		OMAP34XX_UART2
 #undef CONFIG_SERIAL3
 #define CONFIG_SERIAL2
 #endif