X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_beagle.h;h=c69b32531cc50963eb01fa3fd1ab23262d86aaaf;hb=43ade93bdb0c8bd57382be810a05b3793749ce85;hp=804e30708fe8dd2e5fba17a7e687101aac450b1d;hpb=7a1af7a79bd79ded6a78d0c1afdbc3353669e313;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 804e307..c69b325 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -29,28 +29,12 @@
 
 #include <configs/ti_omap3_common.h>
 
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_REVISION_TAG		1
 #define CONFIG_ENV_OVERWRITE
 
 /* Status LED */
-#define CONFIG_STATUS_LED		1
-#define CONFIG_BOARD_SPECIFIC_LED	1
-#define STATUS_LED_BIT			0x01
-#define STATUS_LED_STATE		STATUS_LED_ON
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BIT1			0x02
-#define STATUS_LED_STATE1		STATUS_LED_ON
-#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BOOT			STATUS_LED_BIT
-#define STATUS_LED_GREEN		STATUS_LED_BIT1
 
 /* Enable Multi Bus support for I2C */
 #define CONFIG_I2C_MULTI_BUS		1
@@ -59,19 +43,11 @@
 #define CONFIG_SYS_I2C_NOPROBES		{{0x0, 0x0}}
 
 /* USB */
-#define CONFIG_MUSB_GADGET
 #define CONFIG_USB_MUSB_OMAP2PLUS
-#define CONFIG_MUSB_PIO_ONLY
-#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_TWL4030_USB		1
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_G_DNL_VENDOR_NUM		0x0451
-#define CONFIG_G_DNL_PRODUCT_NUM	0xd022
-#define CONFIG_G_DNL_MANUFACTURER	"TI"
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
@@ -79,7 +55,6 @@
 #define CONFIG_FASTBOOT_BUF_SIZE	0x07000000
 
 /* USB EHCI */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 
 #define CONFIG_USB_EHCI_OMAP
@@ -96,20 +71,13 @@
 #define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
 
 /* commands to include */
-#define CONFIG_CMD_ASKENV
-
-#define CONFIG_CMD_CACHE
 
 #define MTDIDS_DEFAULT			"nand0=nand"
 #define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
 					"1920k(u-boot),128k(u-boot-env),"\
 					"4m(kernel),-(fs)"
 
-#define CONFIG_USB_STORAGE	/* USB storage support		*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
-#define CONFIG_CMD_LED		/* LED support			*/
-#define CONFIG_CMD_GPIO     /* Enable gpio command */
-#define CONFIG_CMD_DHCP
 
 #define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
 
@@ -121,16 +89,56 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST	1
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
 
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0)
+
+#define CONFIG_BOOTCOMMAND \
+	"run findfdt; " \
+	"run distro_bootcmd; " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
+		"if run userbutton; then " \
+			"setenv bootenv uEnv.txt;" \
+		"else " \
+			"setenv bootenv user.txt;" \
+		"fi;" \
+		"echo SD/MMC found on device ${mmcdev};" \
+		"if run loadbootenv; then " \
+			"echo Loaded environment from ${bootenv};" \
+			"run importbootenv;" \
+		"fi;" \
+		"if test -n $uenvcmd; then " \
+			"echo Running uenvcmd ...;" \
+			"run uenvcmd;" \
+		"fi;" \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loadimage; then " \
+				"run mmcboot;" \
+			"fi;" \
+		"fi; " \
+	"fi;" \
+	"run nandboot;" \
+	"setenv bootfile zImage;" \
+	"if run loadimage; then " \
+		"run loadfdt;" \
+		"run mmcbootz; " \
+	"fi; " \
+
+#include <config_distro_bootcmd.h>
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x80200000\0" \
+	"kernel_addr_r=0x80200000\0" \
 	"rdaddr=0x81000000\0" \
+	"initrd_addr_r=0x81000000\0" \
 	"fdt_high=0xffffffff\0" \
 	"fdtaddr=0x80f80000\0" \
+	"fdt_addr_r=0x80f80000\0" \
 	"usbtty=cdc_acm\0" \
 	"bootfile=uImage\0" \
 	"ramdisk=ramdisk.gz\0" \
@@ -225,39 +233,8 @@
 	"userbutton=if gpio input 173; then run userbutton_xm; " \
 		"else run userbutton_nonxm; fi;\0" \
 	"userbutton_xm=gpio input 4;\0" \
-	"userbutton_nonxm=gpio input 7;\0"
-/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
-#define CONFIG_BOOTCOMMAND \
-	"run findfdt; " \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run userbutton; then " \
-			"setenv bootenv uEnv.txt;" \
-		"else " \
-			"setenv bootenv user.txt;" \
-		"fi;" \
-		"echo SD/MMC found on device ${mmcdev};" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loadimage; then " \
-				"run mmcboot;" \
-			"fi;" \
-		"fi; " \
-	"fi;" \
-	"run nandboot;" \
-	"setenv bootfile zImage;" \
-	"if run loadimage; then " \
-		"run loadfdt;" \
-		"run mmcbootz; " \
-	"fi; " \
+	"userbutton_nonxm=gpio input 7;\0" \
+	BOOTENV
 
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
@@ -290,13 +267,11 @@
 
 #define CONFIG_OMAP3_SPI
 
-#define CONFIG_SYS_CACHELINE_SIZE	64
-
 /* Defines for SPL */
 #define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048