X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_beagle.h;h=8a69a5f9764c1142868407e44137ca87cfa2fdc5;hb=711b534120c0a5f73cdb9a25eb91f9aa0c5e09ab;hp=e574742a46092b230f017474692c22bcd317d21a;hpb=1254ff97abb7606ccd0d7bdcd9f22581c50fe535;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index e574742..8a69a5f 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -29,12 +29,6 @@
 
 #include <configs/ti_omap3_common.h>
 
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_REVISION_TAG		1
@@ -59,26 +53,18 @@
 #define CONFIG_SYS_I2C_NOPROBES		{{0x0, 0x0}}
 
 /* USB */
-#define CONFIG_MUSB_GADGET
 #define CONFIG_USB_MUSB_OMAP2PLUS
-#define CONFIG_MUSB_PIO_ONLY
-#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_TWL4030_USB		1
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_G_DNL_VENDOR_NUM		0x0451
-#define CONFIG_G_DNL_PRODUCT_NUM	0xd022
-#define CONFIG_G_DNL_MANUFACTURER	"TI"
+#define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_USB_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
-#define CONFIG_USB_FASTBOOT_BUF_SIZE	0x07000000
+#define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE	0x07000000
 
 /* USB EHCI */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 
 #define CONFIG_USB_EHCI_OMAP
@@ -95,20 +81,14 @@
 #define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
 
 /* commands to include */
-#define CONFIG_CMD_ASKENV
-
-#define CONFIG_CMD_CACHE
 
 #define MTDIDS_DEFAULT			"nand0=nand"
 #define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
 					"1920k(u-boot),128k(u-boot-env),"\
 					"4m(kernel),-(fs)"
 
-#define CONFIG_USB_STORAGE	/* USB storage support		*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
 #define CONFIG_CMD_LED		/* LED support			*/
-#define CONFIG_CMD_GPIO     /* Enable gpio command */
-#define CONFIG_CMD_DHCP
 
 #define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
 
@@ -120,7 +100,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST	1
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
@@ -289,13 +268,11 @@
 
 #define CONFIG_OMAP3_SPI
 
-#define CONFIG_SYS_CACHELINE_SIZE	64
-
 /* Defines for SPL */
 #define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048