X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap1510inn.h;h=9ff4f843ccd6c1f2a8d5420b2adfa4ea41488a6b;hb=25ddd1fb0a2281b182529afbc8fda5de2dc16d96;hp=88d6c462b431d317ab7c9b2338ec9653f846cfeb;hpb=656658dd1577b62d5192ba2db4d9b8a3be1dbee3;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 88d6c46..9ff4f84 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -27,12 +27,6 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ - -/* * High Level Configuration Options * (easy to change) */ @@ -55,8 +49,7 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* * Hardware drivers @@ -66,18 +59,19 @@ #define CONFIG_SMC9196_BASE 0x08000300 #define CONFIG_SMC9196_EXT_PHY */ -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE 0x08000300 #define CONFIG_LAN91C96_EXT_PHY /* * NS16550 Configuration */ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE (-4) -#define CFG_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */ -#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */ +#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ /* * select serial console configuration @@ -90,21 +84,34 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include #include #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=bootp" #define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" -#define CFG_AUTOLOAD "n" /* No autoload */ +#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ @@ -113,26 +120,24 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "OMAP1510 Innovator # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x10000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "OMAP1510 Innovator # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ -#define CFG_LOAD_ADDR 0x10000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */ -/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. +/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. * This time is further subdivided by a local divisor. */ -#define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */ -#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ -#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) +#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */ +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Stack sizes @@ -154,35 +159,35 @@ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ #define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */ -#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + PHYS_FLASH_SECT_SIZE) -#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ -#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */ -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE } +#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE) +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */ +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE } /*----------------------------------------------------------------------- * FLASH driver setup */ -#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ +#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ -#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE -#define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */ #endif /* __CONFIG_H */