X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap1510inn.h;h=7a7fa227c0c5113a03c3c25f1eb9dc07c3806d08;hb=f9c1456cf632175afb7d6b27f42f1aab8432be0f;hp=6c1c5ec0d79b19e8d47e71a6be263fd825e31f5d;hpb=81472d893fa565c9d300928a40e504a689bde131;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 6c1c5ec..7a7fa22 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -38,8 +38,6 @@
 /* input clock of PLL */
 #define CONFIG_SYS_CLK_FREQ	12000000	/* the OMAP1510 Innovator has 12MHz input clock */
 
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
@@ -50,7 +48,6 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -60,7 +57,7 @@
 #define CONFIG_SMC9196_BASE 0x08000300
 #define CONFIG_SMC9196_EXT_PHY
 */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x08000300
 #define CONFIG_LAN91C96_EXT_PHY
 
@@ -84,8 +81,6 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 
 /*
  * Command line configuration.
@@ -132,23 +127,12 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x10000000	/* default load address */
 
-/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
 #define CONFIG_SYS_TIMERBASE	OMAP1510_TIMER1_BASE	/* use timer 1 */
-#define CONFIG_SYS_PTV		7	/* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ		((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
+#define CONFIG_SYS_PTV		2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ		1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -161,6 +145,8 @@
 
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
+#define PHYS_SRAM		0x20000000
+
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
@@ -190,4 +176,7 @@
 #define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
 #define CONFIG_ENV_OFFSET		( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN )	/* Environment after Monitor */
 
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR 	PHYS_SRAM
+
 #endif	/* __CONFIG_H */