X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fodroid.h;h=c3520bb15f40f07baeba0ece3628f447e74e6906;hb=d01806a8fcbdaedcc67cead56ece572021d97ab7;hp=afc7c5e35f25469e727382f6fc566952e3e0a4e1;hpb=4125bbcef6a998ce8580a1f5c53c8c93a56a125b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index afc7c5e..c3520bb 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Samsung Electronics
  * Sanghee Kim <sh0130.kim@samsung.com>
@@ -5,8 +6,6 @@
  * Przemyslaw Marczak <p.marczak@samsung.com>
  *
  * Configuation settings for the Odroid-U3 (EXYNOS4412) board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_ODROID_U3_H
@@ -22,7 +21,6 @@
 
 #define CONFIG_MACH_TYPE	4289
 
-#define CONFIG_NR_DRAM_BANKS	8
 #define CONFIG_SYS_SDRAM_BASE	0x40000000
 #define SDRAM_BANK_SIZE		(256 << 20)	/* 256 MB */
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
@@ -34,17 +32,14 @@
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_TEXT_BASE		0x43e00000
 
 #include <linux/sizes.h>
 
 /* select serial console configuration */
-#define CONFIG_SERIAL1
 
 /* Console configuration */
 
-#define CONFIG_BOOTARGS			"Please use defined boot"
-#define CONFIG_BOOTCOMMAND		"run autoboot"
+#define CONFIG_BOOTCOMMAND		"run distro_bootcmd ; run autoboot"
 #define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
 
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
@@ -52,9 +47,8 @@
 
 #define CONFIG_SYS_MONITOR_BASE	0x00000000
 
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
-#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_SIZE			SZ_16K
 #define CONFIG_ENV_OFFSET		(SZ_1K * 1280) /* 1.25 MiB offset */
 #define CONFIG_ENV_OVERWRITE
 
@@ -87,6 +81,12 @@
 	"bl2 raw 0x1f 0x1d;" \
 	"tzsw raw 0x83f 0x138\0"
 
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0)
+
+#include <config_distro_bootcmd.h>
+
 /*
  * Bootable media layout:
  * dev:    SD   eMMC(part boot)
@@ -104,21 +104,21 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} " \
 		"boot.scr\0" \
-	"loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
+	"loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kernel_addr_r} " \
 		"${kernelname}\0" \
-	"loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
+	"loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${ramdisk_addr_r} " \
 		"${initrdname}\0" \
-	"loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
+	"loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdt_addr_r} " \
 		"${fdtfile}\0" \
 	"check_ramdisk=" \
 		"if run loadinitrd; then " \
-			"setenv initrd_addr ${initrdaddr};" \
+			"setenv initrd_addr ${ramdisk_addr_r};" \
 		"else " \
 			"setenv initrd_addr -;" \
 		"fi;\0" \
 	"check_dtb=" \
 		"if run loaddtb; then " \
-			"setenv fdt_addr ${fdtaddr};" \
+			"setenv fdt_addr ${fdt_addr_r};" \
 		"else " \
 			"setenv fdt_addr;" \
 		"fi;\0" \
@@ -129,27 +129,24 @@
 		"run loadbootscript;" \
 		"source ${scriptaddr}\0" \
 	"boot_fit=" \
-		"setenv kerneladdr 0x42000000;" \
 		"setenv kernelname Image.itb;" \
 		"run loadkernel;" \
 		"run kernel_args;" \
-		"bootm ${kerneladdr}#${boardname}\0" \
+		"bootm ${kernel_addr_r}#${boardname}\0" \
 	"boot_uimg=" \
-		"setenv kerneladdr 0x40007FC0;" \
 		"setenv kernelname uImage;" \
 		"run check_dtb;" \
 		"run check_ramdisk;" \
 		"run loadkernel;" \
 		"run kernel_args;" \
-		"bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
+		"bootm ${kernel_addr_r} ${initrd_addr} ${fdt_addr};\0" \
 	"boot_zimg=" \
-		"setenv kerneladdr 0x40007FC0;" \
 		"setenv kernelname zImage;" \
 		"run check_dtb;" \
 		"run check_ramdisk;" \
 		"run loadkernel;" \
 		"run kernel_args;" \
-		"bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
+		"bootz ${kernel_addr_r} ${initrd_addr} ${fdt_addr};\0" \
 	"autoboot=" \
 		"if test -e mmc 0 boot.scr; then; " \
 			"run boot_script; " \
@@ -165,43 +162,31 @@
 	"mmcbootpart=1\0" \
 	"mmcrootdev=0\0" \
 	"mmcrootpart=2\0" \
-	"bootdelay=0\0" \
 	"dfu_alt_system="CONFIG_DFU_ALT \
 	"dfu_alt_info=Please reset the board\0" \
 	"consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
 	"consoleoff=set console console=ram; save; reset\0" \
 	"initrdname=uInitrd\0" \
-	"initrdaddr=42000000\0" \
+	"ramdisk_addr_r=0x42000000\0" \
 	"scriptaddr=0x42000000\0" \
-	"fdtaddr=40800000\0"
-
-/* I2C */
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_SYS_I2C_S3C24X0_SPEED	100000
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE	0
+	"fdt_addr_r=0x40800000\0" \
+	"kernel_addr_r=0x41000000\0" \
+	BOOTENV
 
 /* GPT */
-#define CONFIG_RANDOM_UUID
 
 /* Security subsystem - enable hw_rand() */
 #define CONFIG_EXYNOS_ACE_SHA
-#define CONFIG_LIB_HW_RAND
 
 /* USB */
 #define CONFIG_USB_EHCI_EXYNOS
 
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-
 /*
  * Supported Odroid boards: X3, U3
  * TODO: Add Odroid X support
  */
 #define CONFIG_MISC_COMMON
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_BOARD_TYPES
-#define CONFIG_MISC_INIT_R
 
 #undef CONFIG_REVISION_TAG