X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fodroid.h;h=281922af4a8de35a579690a72553c93e2c2405d7;hb=166a77b34b30f64f7b12a3016b0bba49d568c52e;hp=8faa7a33fcbc30ca213b212a4dbc38cb55657314;hpb=2600df4f8ef12ece9cec13030005919e0ba2b0d5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index 8faa7a3..281922a 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Samsung Electronics
  * Sanghee Kim <sh0130.kim@samsung.com>
@@ -5,8 +6,6 @@
  * Przemyslaw Marczak <p.marczak@samsung.com>
  *
  * Configuation settings for the Odroid-U3 (EXYNOS4412) board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_ODROID_U3_H
@@ -20,9 +19,6 @@
 #define CONFIG_SYS_PL310_BASE	0x10502000
 #endif
 
-#define CONFIG_MACH_TYPE	4289
-
-#define CONFIG_NR_DRAM_BANKS	8
 #define CONFIG_SYS_SDRAM_BASE	0x40000000
 #define SDRAM_BANK_SIZE		(256 << 20)	/* 256 MB */
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
@@ -30,31 +26,15 @@
 #define CONFIG_SYS_MEM_TOP_HIDE		(1UL << 20UL)
 #define CONFIG_TZSW_RESERVED_DRAM_SIZE	CONFIG_SYS_MEM_TOP_HIDE
 
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
 #include <linux/sizes.h>
 
-/* select serial console configuration */
-#define CONFIG_SERIAL1
-
-/* Console configuration */
-
-#define CONFIG_BOOTCOMMAND		"run autoboot"
-#define CONFIG_DEFAULT_CONSOLE		"ttySAC1,115200n8"
+#define CONFIG_BOOTCOMMAND		"run distro_bootcmd ; run autoboot"
 
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
 					- GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_SYS_MONITOR_BASE	0x00000000
 
-#define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
-#define CONFIG_ENV_SIZE			4096
-#define CONFIG_ENV_OFFSET		(SZ_1K * 1280) /* 1.25 MiB offset */
-#define CONFIG_ENV_OVERWRITE
-
 /* Partitions name */
 #define PARTS_BOOT		"boot"
 #define PARTS_ROOT		"platform"
@@ -69,7 +49,6 @@
 	""PARTS_BOOT" part 0 1;" \
 	""PARTS_ROOT" part 0 2\0" \
 
-#define CONFIG_SET_DFU_ALT_INFO
 #define CONFIG_SET_DFU_ALT_BUF_LEN	(SZ_1K)
 
 #define CONFIG_DFU_ALT_BOOT_EMMC \
@@ -84,6 +63,12 @@
 	"bl2 raw 0x1f 0x1d;" \
 	"tzsw raw 0x83f 0x138\0"
 
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 2) \
+	func(MMC, mmc, 0)
+
+#include <config_distro_bootcmd.h>
+
 /*
  * Bootable media layout:
  * dev:    SD   eMMC(part boot)
@@ -101,21 +86,21 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} " \
 		"boot.scr\0" \
-	"loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
+	"loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kernel_addr_r} " \
 		"${kernelname}\0" \
-	"loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
+	"loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${ramdisk_addr_r} " \
 		"${initrdname}\0" \
-	"loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
+	"loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdt_addr_r} " \
 		"${fdtfile}\0" \
 	"check_ramdisk=" \
 		"if run loadinitrd; then " \
-			"setenv initrd_addr ${initrdaddr};" \
+			"setenv initrd_addr ${ramdisk_addr_r};" \
 		"else " \
 			"setenv initrd_addr -;" \
 		"fi;\0" \
 	"check_dtb=" \
 		"if run loaddtb; then " \
-			"setenv fdt_addr ${fdtaddr};" \
+			"setenv fdt_addr ${fdt_addr_r};" \
 		"else " \
 			"setenv fdt_addr;" \
 		"fi;\0" \
@@ -126,51 +111,49 @@
 		"run loadbootscript;" \
 		"source ${scriptaddr}\0" \
 	"boot_fit=" \
-		"setenv kerneladdr 0x42000000;" \
 		"setenv kernelname Image.itb;" \
 		"run loadkernel;" \
 		"run kernel_args;" \
-		"bootm ${kerneladdr}#${boardname}\0" \
+		"bootm ${kernel_addr_r}#${board_name}\0" \
 	"boot_uimg=" \
-		"setenv kerneladdr 0x40007FC0;" \
 		"setenv kernelname uImage;" \
 		"run check_dtb;" \
 		"run check_ramdisk;" \
 		"run loadkernel;" \
 		"run kernel_args;" \
-		"bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
+		"bootm ${kernel_addr_r} ${initrd_addr} ${fdt_addr};\0" \
 	"boot_zimg=" \
-		"setenv kerneladdr 0x40007FC0;" \
 		"setenv kernelname zImage;" \
 		"run check_dtb;" \
 		"run check_ramdisk;" \
 		"run loadkernel;" \
 		"run kernel_args;" \
-		"bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
+		"bootz ${kernel_addr_r} ${initrd_addr} ${fdt_addr};\0" \
 	"autoboot=" \
-		"if test -e mmc 0 boot.scr; then; " \
+		"if test -e mmc ${mmcbootdev} boot.scr; then; " \
 			"run boot_script; " \
-		"elif test -e mmc 0 Image.itb; then; " \
+		"elif test -e mmc ${mmcbootdev} Image.itb; then; " \
 			"run boot_fit;" \
-		"elif test -e mmc 0 zImage; then; " \
+		"elif test -e mmc ${mmcbootdev} zImage; then; " \
 			"run boot_zimg;" \
-		"elif test -e mmc 0 uImage; then; " \
+		"elif test -e mmc ${mmcbootdev} uImage; then; " \
 			"run boot_uimg;" \
 		"fi;\0" \
-	"console=" CONFIG_DEFAULT_CONSOLE "\0" \
+	"console=console=ttySAC1,115200n8\0" \
 	"mmcbootdev=0\0" \
 	"mmcbootpart=1\0" \
 	"mmcrootdev=0\0" \
 	"mmcrootpart=2\0" \
-	"bootdelay=0\0" \
 	"dfu_alt_system="CONFIG_DFU_ALT \
 	"dfu_alt_info=Please reset the board\0" \
 	"consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
 	"consoleoff=set console console=ram; save; reset\0" \
 	"initrdname=uInitrd\0" \
-	"initrdaddr=42000000\0" \
+	"ramdisk_addr_r=0x42000000\0" \
 	"scriptaddr=0x42000000\0" \
-	"fdtaddr=40800000\0"
+	"fdt_addr_r=0x40800000\0" \
+	"kernel_addr_r=0x41000000\0" \
+	BOOTENV
 
 /* GPT */
 
@@ -185,9 +168,5 @@
  * TODO: Add Odroid X support
  */
 #define CONFIG_MISC_COMMON
-#define CONFIG_BOARD_TYPES
-#define CONFIG_MISC_INIT_R
-
-#undef CONFIG_REVISION_TAG
 
 #endif	/* __CONFIG_H */