X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fo2dnt-common.h;h=1b4200bcbffc8fcd881454442aee18fee4b7e1f0;hb=5c84ad097d829bb1e6460438f33e1536b23b3c9b;hp=891378420e0cd3269644f20c3870f9ee254c6d69;hpb=3fc304b8d77ce6646d38ae506e9fae74b9975631;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
index 8913784..1b4200b 100644
--- a/include/configs/o2dnt-common.h
+++ b/include/configs/o2dnt-common.h
@@ -17,7 +17,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_MPC5200
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* running at 33.000000MHz */
 
@@ -41,7 +40,6 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	5	/* console is on PSC5 */
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
@@ -50,8 +48,6 @@
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  */
-#undef CONFIG_PCI
-#define CONFIG_PCI_PNP		1
 
 #define CONFIG_PCI_MEM_BUS	0x40000000
 #define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
@@ -64,9 +60,6 @@
 #define CONFIG_SYS_XLB_PIPELINING	1
 
 /* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
 
 #define CONFIG_TIMESTAMP	/* Print image info with timestamp */
 
@@ -75,13 +68,9 @@
 /*
  * Supported commands
  */
-#define CONFIG_CMD_EEPROM
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
 #endif
-#ifdef CONFIG_POST
-#define CONFIG_CMD_DIAG
-#endif
 
 #if (CONFIG_SYS_TEXT_BASE == 0xFC000000) || (CONFIG_SYS_TEXT_BASE == 0xFF000000)
 /* Boot low with 16 or 32 MB Flash */
@@ -95,8 +84,8 @@
 
 #undef	CONFIG_BOOTARGS
 
-#if !defined(CONFIG_CONSOLE_DEV)
-#define CONFIG_CONSOLE_DEV	"ttyPSC1"
+#if !defined(CONSOLE_DEV)
+#define CONSOLE_DEV	"ttyPSC1"
 #endif
 
 /*
@@ -131,7 +120,7 @@
 	"addmem=setenv bootargs ${bootargs} ${memlimit}\0"		\
 	"addmisc=sete bootargs ${bootargs} ${miscargs}\0"		\
 	"addtty=sete bootargs ${bootargs} console="			\
-		CONFIG_CONSOLE_DEV ",${baudrate}\0"			\
+		CONSOLE_DEV ",${baudrate}\0"			\
 	"bootfile="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0"	\
 	"kernel_addr_r=600000\0"					\
 	"initrd_high=0x03e00000\0"					\
@@ -183,27 +172,6 @@
 #endif
 
 /*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C			1	/* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 or #2 */
-#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * EEPROM configuration:
- *
- * O2DNT board is equiped with Ramtron FRAM device FM24CL16
- * 16 Kib Ferroelectric Nonvolatile serial RAM memory
- * organized as 2048 x 8 bits and addressable as eight I2C devices
- * 0x50 ... 0x57 each 256 bytes in size
- *
- */
-#define CONFIG_SYS_I2C_FRAM
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-/*
  * There is no write delay with FRAM, write operations are performed at bus
  * speed. Thus, no status polling or write delay is needed.
  */