X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fo2dnt-common.h;h=1b4200bcbffc8fcd881454442aee18fee4b7e1f0;hb=2c62e313b14186d67f5bf26095f36a246cb0c3a4;hp=4fcc8e45473b6fd2be2d2c3439bac9149cabd07b;hpb=f18fa31cdcfeecaf56e61224eb18d2f2b6d39d85;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
index 4fcc8e4..1b4200b 100644
--- a/include/configs/o2dnt-common.h
+++ b/include/configs/o2dnt-common.h
@@ -40,7 +40,6 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	5	/* console is on PSC5 */
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
@@ -61,8 +60,6 @@
 #define CONFIG_SYS_XLB_PIPELINING	1
 
 /* Partitions */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
 
 #define CONFIG_TIMESTAMP	/* Print image info with timestamp */
 
@@ -71,13 +68,9 @@
 /*
  * Supported commands
  */
-#define CONFIG_CMD_EEPROM
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
 #endif
-#ifdef CONFIG_POST
-#define CONFIG_CMD_DIAG
-#endif
 
 #if (CONFIG_SYS_TEXT_BASE == 0xFC000000) || (CONFIG_SYS_TEXT_BASE == 0xFF000000)
 /* Boot low with 16 or 32 MB Flash */
@@ -179,27 +172,6 @@
 #endif
 
 /*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C			1	/* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 or #2 */
-#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * EEPROM configuration:
- *
- * O2DNT board is equiped with Ramtron FRAM device FM24CL16
- * 16 Kib Ferroelectric Nonvolatile serial RAM memory
- * organized as 2048 x 8 bits and addressable as eight I2C devices
- * 0x50 ... 0x57 each 256 bytes in size
- *
- */
-#define CONFIG_SYS_I2C_FRAM
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-/*
  * There is no write delay with FRAM, write operations are performed at bus
  * speed. Thus, no status polling or write delay is needed.
  */