X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fnsa310s.h;h=1cb0d68b5af2f3e5acc9f9729a77782d87c6d83c;hb=19ea606109135c3d9892d86e1b1c2a8fb551cc1b;hp=9c84acc89c200e53fec3e3a81de8173e98b61294;hpb=795428fc679fb74734a7144498a00e2274214f03;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h
index 9c84acc..1cb0d68 100644
--- a/include/configs/nsa310s.h
+++ b/include/configs/nsa310s.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015
  * Gerald Kerma <dreagle@doukki.net>
  * Tony Dinh <mibodhi@gmail.com>
  * Luka Perkov <luka.perkov@sartura.hr>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_NSA310S_H
@@ -16,27 +15,9 @@
 #define CONFIG_KW88F6702		1	/* SOC Name */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
 
-/* add target to build it automatically upon "make" */
-#define CONFIG_BUILD_TARGET		"u-boot.kwb"
-
-/* compression configuration */
-#define CONFIG_BZIP2
-
-/* commands configuration */
-#define CONFIG_SYS_MVFS
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-common.h"
 
 /* environment variables configuration */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#endif
-#define CONFIG_ENV_SIZE		0x20000
-#define CONFIG_ENV_OFFSET	0xe0000
 
 /* default environment variables */
 #define CONFIG_BOOTCOMMAND \
@@ -49,24 +30,16 @@
 	"fdt addr 0x700000; fdt resize; fdt chosen; " \
 	"bootz 0x800000 - 0x700000"
 
-#define CONFIG_MTDPARTS \
-	"mtdparts=orion_nand:" \
-	"0xe0000@0x0(uboot)," \
-	"0x20000@0xe0000(uboot_env)," \
-	"0x100000@0x100000(second_stage_uboot)," \
-	"-@0x200000(root)\0"
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"console=console=ttyS0,115200\0" \
 	"mtdids=nand0=orion_nand\0" \
-	"mtdparts="CONFIG_MTDPARTS \
+	"mtdparts="CONFIG_MTDPARTS_DEFAULT \
 	"kernel=/boot/zImage\0" \
 	"fdt=/boot/nsa310s.dtb\0" \
 	"bootargs_root=ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw\0"
 
 /* Ethernet driver configuration */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	1
 #define CONFIG_RESET_PHY_R