X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fnovena.h;h=3ffb44ab72524fb909fdd6dec942d7996b376b1b;hb=0613c36a7a5973d58a50b764ee647099e80cc97d;hp=011284ee5d84b625c5af685ab8cb523823492dce;hpb=15e7b7682474efb6504d6366bfd5b717f22f2f3a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/novena.h b/include/configs/novena.h
index 011284e..3ffb44a 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -9,7 +9,6 @@
 #define __CONFIG_H
 
 /* System configurations */
-#define CONFIG_KEYBOARD
 
 #include "mx6_common.h"
 
@@ -26,78 +25,40 @@
  */
 
 /* Booting Linux */
-#define CONFIG_BOOTFILE			"fitImage"
-#define CONFIG_HOSTNAME			"novena"
 
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)
-
-/* SPL */
-#include "imx6_spl.h"			/* common IMX6 SPL configuration */
-
-/* Ethernet Configuration */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_ETH
-#endif
-
-/* I2C */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_SPD_BUS_NUM		0
+#define CFG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
 /* I2C EEPROM */
 
 /* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CFG_SYS_FSL_ESDHC_ADDR	0
+#define CFG_SYS_FSL_USDHC_NUM	2
 
 /* PCI express */
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(3, 29)
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(7, 12)
 #endif
 
 /* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
 
-/* SATA Configs */
-#define CONFIG_LBA48
-
 /* UART */
 #define CONFIG_MXC_UART_BASE		UART2_BASE
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
-/* Gadget part */
-#define CONFIG_USBD_HS
 #endif
 
-/* Video output */
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_IMX_HDMI
-#define CONFIG_IMX_VIDEO_SKIP
-
 /* Extra U-Boot environment. */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS					\
+#define CFG_EXTRA_ENV_SETTINGS					\
 	"fdt_high=0xffffffff\0"						\
 	"initrd_high=0xffffffff\0"					\
 	"consdev=ttymxc1\0"						\
@@ -105,10 +66,10 @@
 	"bootdev=/dev/mmcblk0p1\0"					\
 	"rootdev=/dev/mmcblk0p2\0"					\
 	"netdev=eth0\0"							\
-	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
-	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
-	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0"			\
-	"ramdisk_addr_r=0x28000000\0"		   			\
+	"kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0"		\
+	"pxefile_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0"		\
+	"scriptaddr="__stringify(CONFIG_SYS_LOAD_ADDR)"\0"			\
+	"ramdisk_addr_r=0x28000000\0"					\
 	"fdt_addr_r=0x18000000\0"					\
 	"fdtfile=imx6q-novena.dtb\0"					\
 	"stdout=serial,vidconsole\0"					\
@@ -167,8 +128,4 @@
 
 #include <config_distro_bootcmd.h>
 
-#else
-#define CONFIG_EXTRA_ENV_SETTINGS
-#endif /* CONFIG_SPL_BUILD */
-
 #endif				/* __CONFIG_H */