X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fnokia_rx51.h;h=caaa9ed86b3402ccc24a8073fe59975ebd652eaa;hb=9b0240f8c6a1caa42da73835090fcb6db60f3d23;hp=a88cfe77d50c2d759eed986e9a69ab6290ed30e0;hpb=0e49f5c26caf9972137a474065afd4bdfe5ec062;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index a88cfe7..caaa9ed 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -40,24 +40,14 @@
  */
 #define V_NS16550_CLK		48000000		/* 48MHz (APLL96/2) */
 
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+#define CFG_SYS_NS16550_CLK		V_NS16550_CLK
 
 /*
  * select serial console configuration
  */
-#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CFG_SYS_NS16550_COM3		OMAP34XX_UART3
 
-#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE
-#define CONFIG_USB_TTY
-#define CONFIG_USBD_VENDORID		0x0421
-#define CONFIG_USBD_PRODUCTID_CDCACM	0x01c8
-#define CONFIG_USBD_PRODUCTID_GSERIAL	0x01c8
-#define CONFIG_USBD_MANUFACTURER	"Nokia"
-#define CONFIG_USBD_PRODUCT_NAME	"N900 (U-Boot)"
+#define CFG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
 
 #define GPIO_SLIDE			71
 
@@ -65,7 +55,7 @@
  * Board ONENAND Info.
  */
 
-#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+#define CFG_SYS_ONENAND_BASE		ONENAND_MAP
 
 /* Environment information */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -78,15 +68,16 @@
 	"kernaddr=0x82008000\0" \
 	"initrdaddr=0x84008000\0" \
 	"scriptaddr=0x86008000\0" \
+	"fileloadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
-		"${loadaddr} ${mmcfile}\0" \
-	"kernload=setenv loadaddr ${kernaddr};" \
+		"${fileloadaddr} ${mmcfile}\0" \
+	"kernload=setenv fileloadaddr ${kernaddr};" \
 		"setenv mmcfile ${mmckernfile};" \
 		"run fileload\0" \
-	"initrdload=setenv loadaddr ${initrdaddr};" \
+	"initrdload=setenv fileloadaddr ${initrdaddr};" \
 		"setenv mmcfile ${mmcinitrdfile};" \
 		"run fileload\0" \
-	"scriptload=setenv loadaddr ${scriptaddr};" \
+	"scriptload=setenv fileloadaddr ${scriptaddr};" \
 		"setenv mmcfile ${mmcscriptfile};" \
 		"run fileload\0" \
 	"scriptboot=echo Running ${mmcscriptfile} from mmc " \
@@ -150,7 +141,7 @@
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
  * This rate is divided by a local divisor.
  */
-#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+#define CFG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 
 /*
  * Physical Memory Map
@@ -161,16 +152,16 @@
  * FLASH and environment organization
  */
 
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CFG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CFG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CFG_SYS_INIT_RAM_SIZE	0x800
 
 /*
  * Attached kernel image
  */
 
 #define SDRAM_SIZE			0x10000000	/* 256 MB */
-#define SDRAM_END			(CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
+#define SDRAM_END			(CFG_SYS_SDRAM_BASE + SDRAM_SIZE)
 
 #define IMAGE_MAXSIZE			0x1FF800	/* 2 MB - 2 kB */
 #define KERNEL_OFFSET			0x40000		/* 256 kB */