X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fnitrogen6x.h;h=13625286c5b7274aa873209b297c0c14ca231275;hb=4125bbcef6a998ce8580a1f5c53c8c93a56a125b;hp=67a3c97f8bb3b38def8b535bb939bf592613ec9d;hpb=1254ff97abb7606ccd0d7bdcd9f22581c50fe535;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 67a3c97..1362528 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -17,26 +17,16 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_CDC
 #define CONFIG_NETCONSOLE
 
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	       UART2_BASE
 
-#define CONFIG_CMD_SF
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_SST
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS  0
 #define CONFIG_SF_DEFAULT_CS   0
@@ -45,9 +35,10 @@
 #endif
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_I2C_EDID
@@ -72,9 +63,6 @@
 #define CONFIG_LIBATA
 #endif
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
@@ -86,10 +74,6 @@
 #define CONFIG_PHY_MICREL_KSZ9021
 
 /* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830
@@ -98,19 +82,10 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
-#define CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 
-/* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
-
 /* Framebuffer and LCD */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
@@ -119,7 +94,6 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_CMD_HDMIDETECT
-#define CONFIG_CONSOLE_MUX
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
@@ -157,6 +131,7 @@
 	"fdt_addr=0x18000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
+	"usb_pgood_delay=2000\0" \
 	"mmcdevs=0 1\0" \
 	"mmcpart=1\0" \
 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
@@ -226,6 +201,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
 	"umsdevs=" CONFIG_UMSDEVS "\0" \
+	"usb_pgood_delay=2000\0" \
 	"console=ttymxc1\0" \
 	"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
 		"sf erase 0xc0000 0x2000 && " \
@@ -317,38 +293,22 @@
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #endif
 
-#define CONFIG_CMD_BMP
-
-#define CONFIG_CMD_TIME
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_ALT_MEMTEST
 
 /*
  * PCI express
  */
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #endif
 
-#define CONFIG_CMD_ELF
-
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
-
-/* Netchip IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER "Boundary"
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
 
+#define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_USB_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
-#define CONFIG_USB_FASTBOOT_BUF_SIZE   0x07000000
+#define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
 
 #endif	       /* __CONFIG_H */