X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fnios2-generic.h;h=6247bf1569e0769d01f9f99fce58fbf8a8c05588;hb=b9cb64825b5e6efeb715abd8b48d9b12f98973e9;hp=624bd5c7eee122e916db772b65108bae4381d1c9;hpb=178d0cc1a4c73c3341afbeb2a93b172de8c96bd1;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
index 624bd5c..6247bf1 100644
--- a/include/configs/nios2-generic.h
+++ b/include/configs/nios2-generic.h
@@ -3,23 +3,7 @@
  * Scott McNutt <smcnutt@psyent.com>
  * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -31,12 +15,14 @@
 #include "../board/altera/nios2-generic/custom_fpga.h" /* fpga parameters */
 #define CONFIG_BOARD_NAME "nios2-generic" /* custom board name */
 #define CONFIG_BOARD_EARLY_INIT_F	/* enable early board-spec. init */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_SYS_NIOS_SYSID_BASE	CONFIG_SYS_SYSID_BASE
 
 /*
  * SERIAL
  */
-#define CONFIG_ALTERA_UART
+#define CONFIG_ALTERA_JTAG_UART
 #if defined(CONFIG_ALTERA_JTAG_UART)
 # define CONFIG_SYS_NIOS_CONSOLE	CONFIG_SYS_JTAG_UART_BASE
 #else
@@ -55,7 +41,6 @@
 #define CONFIG_SYS_LOW_RES_TIMER
 #define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_TIMER_BASE
 #define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_TIMER_IRQ
-#define CONFIG_SYS_HZ			1000	/* Always 1000 */
 #define CONFIG_SYS_NIOS_TMRMS		10	/* Desired period (msec)*/
 #define CONFIG_SYS_NIOS_TMRCNT \
 	(CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1)
@@ -71,6 +56,9 @@
 #define CONFIG_BOARD_SPECIFIC_LED
 #define CONFIG_GPIO_LED		/* Enable GPIO LED driver */
 #define CONFIG_GPIO			/* Enable GPIO driver */
+#define LED_PIO_BASE			USER_LED_PIO_8OUT_BASE
+#define LED_PIO_WIDTH			8
+#define LED_PIO_RSTVAL			0xff
 
 #define STATUS_LED_BIT			0	/* Bit-0 on GPIO */
 #define STATUS_LED_STATE		1	/* Blinking */
@@ -101,6 +89,10 @@
 # define CONFIG_CMD_PING
 #endif
 
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_LMB
+
 /*
  * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
  * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
@@ -110,7 +102,7 @@
  */
 #define CONFIG_ENV_IS_IN_FLASH
 
-#define CONFIG_ENV_SIZE		0x10000	/* 64k, 1 sector */
+#define CONFIG_ENV_SIZE		0x20000	/* 128k, 1 sector */
 #define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
 #define CONFIG_ENV_ADDR		((CONFIG_SYS_RESET_ADDR + \
 					  CONFIG_SYS_MONITOR_LEN) | \
@@ -136,7 +128,6 @@
  * MISC
  */
 #define CONFIG_SYS_LONGHELP		/* Provide extended help */
-#define CONFIG_SYS_PROMPT		"==> "	/* Command prompt	*/
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O buf size */
 #define CONFIG_SYS_MAXARGS		16	/* Max command args	*/
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Bootarg buf size */