X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6ullevk.h;h=247d5e1bcc3a5d39de43d687530168a77d6c69bc;hb=92832045c54586e9dffa082ff8cd8c2ef6040757;hp=cf9f8abedf9fe6f4e517335b900132c92b72325b;hpb=5512f5ccf1dc5cec068f8efa1d8ce81f51a988d3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h
index cf9f8ab..247d5e1 100644
--- a/include/configs/mx6ullevk.h
+++ b/include/configs/mx6ullevk.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2016 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __MX6ULLEVK_CONFIG_H
 #define __MX6ULLEVK_CONFIG_H
@@ -11,21 +10,12 @@
 
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include "mx6_common.h"
 #include <asm/mach-imx/gpio.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#ifndef CONFIG_CSF_SIZE
-#define CONFIG_CSF_SIZE 0x4000
-#endif
-#endif
-
 #define PHYS_SDRAM_SIZE	SZ_512M
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
-
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
 /* MMC Configs */
@@ -40,14 +30,6 @@
 #endif
 #endif
 
-/* I2C configs */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_SPEED		100000
-#endif
-
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -56,7 +38,7 @@
 	"console=ttymxc0\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
-	"fdt_file=imx6ull-14x14-evk.dtb\0" \
+	"fdt_file=undefined\0" \
 	"fdt_addr=0x83000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
@@ -88,6 +70,16 @@
 		"else " \
 			"bootz; " \
 		"fi;\0" \
+		"findfdt="\
+			"if test $fdt_file = undefined; then " \
+				"if test $board_name = ULZ-EVK && test $board_rev = 14X14; then " \
+					"setenv fdt_file imx6ulz-14x14-evk.dtb; fi; " \
+				"if test $board_name = EVK && test $board_rev = 14X14; then " \
+					"setenv fdt_file imx6ull-14x14-evk.dtb; fi; " \
+				"if test $fdt_file = undefined; then " \
+					"echo WARNING: Could not determine dtb to use; " \
+				"fi; " \
+			"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
@@ -114,6 +106,7 @@
 		"fi;\0" \
 
 #define CONFIG_BOOTCOMMAND \
+	   "run findfdt;" \
 	   "mmc dev ${mmcdev};" \
 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
 		   "if run loadbootscript; then " \
@@ -127,14 +120,10 @@
 	   "else run netboot; fi"
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x8000000)
 
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
@@ -147,27 +136,19 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* environment organization */
-#define CONFIG_SYS_MMC_ENV_DEV		1	/* USDHC2 */
-#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
 #define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 
-#define CONFIG_ENV_SIZE			SZ_8K
-#define CONFIG_ENV_OFFSET		(12 * SZ_64K)
-
-#define CONFIG_IMX_THERMAL
-
 #define CONFIG_IOMUX_LPSR
 
 #define CONFIG_SOFT_SPI
 
-#ifdef CONFIG_FSL_QSPI
-#define CONFIG_SYS_FSL_QSPI_AHB
-#define CONFIG_SF_DEFAULT_BUS		0
-#define CONFIG_SF_DEFAULT_CS		0
-#define CONFIG_SF_DEFAULT_SPEED	40000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
-#define FSL_QSPI_FLASH_NUM		1
-#define FSL_QSPI_FLASH_SIZE		SZ_32M
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_ENET_DEV		1
+#if (CONFIG_FEC_ENET_DEV == 0)
+#define CONFIG_ETHPRIME			"eth0"
+#elif (CONFIG_FEC_ENET_DEV == 1)
+#define CONFIG_ETHPRIME			"eth1"
+#endif
 #endif
 
 #endif