X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6sxsabresd.h;h=76e3dc8b3828c003fdc495c994ba223ea8239169;hb=06ddcfc95a0eb1cf17c1436bfeb3cc4d056fdb3a;hp=3bff496bad2633b003659ed7ab2881ebb631d92c;hpb=164fed941f09122a92d8fc15d3eccda8e1351dca;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 3bff496..76e3dc8 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -8,16 +8,14 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "mx6_common.h"
 
 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
 #endif
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
-
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
 #ifdef CONFIG_IMX_BOOTAUX
@@ -109,22 +107,7 @@
 		"if test test $board_rev = REVA ; then " \
 			"setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \
 
-#define CONFIG_BOOTCOMMAND \
-	   "run findfdt; " \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
-
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000)
 
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
@@ -141,22 +124,10 @@
 /* MMC Configuration */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC4_BASE_ADDR
 
-/* I2C Configs */
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED		  100000
-
 /* Network */
-#define CONFIG_FEC_MXC
 
-#define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR          0x1
 
-#define CONFIG_FEC_XCV_TYPE             RGMII
-#define CONFIG_ETHPRIME                 "FEC"
-
 #ifdef CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
@@ -171,24 +142,10 @@
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(2, 1)
 #endif
 
-#define CONFIG_IMX_THERMAL
-
 #ifndef CONFIG_SPL_BUILD
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_MXS
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_LOGO
+#ifdef CONFIG_DM_VIDEO
 #define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR
 #endif
 #endif
 
-#define CONFIG_SYS_FSL_USDHC_NUM	3
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV		2  /*USDHC4*/
-#endif
-
 #endif				/* __CONFIG_H */