X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6sxsabresd.h;h=570e2ce687ac8e87f12ef714689b07722562e29e;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=b30f9e51fbd5fd9d7599800a8306e93d4c10bfd0;hpb=e6676a34c4b5b78cd20c02e396d9d5f7b7ceff46;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index b30f9e5..570e2ce 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -16,14 +16,9 @@
 #include "imx6_spl.h"
 #endif
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
-
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
 #ifdef CONFIG_IMX_BOOTAUX
-/* Set to QSPI2 B flash at default */
-#define CONFIG_SYS_AUXCORE_BOOTDATA 0x78000000
 
 #define UPDATE_M4_ENV \
 	"m4image=m4_qspi.bin\0" \
@@ -38,7 +33,7 @@
 				"sf write ${loadaddr} 0x0 ${filesize}; " \
 			"fi; " \
 		"fi\0" \
-	"m4boot=sf probe 1:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
+	"m4boot=sf probe 1:0; bootaux 0x78000000\0"
 #else
 #define UPDATE_M4_ENV ""
 #endif
@@ -110,19 +105,6 @@
 		"if test test $board_rev = REVA ; then " \
 			"setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \
 
-#define CONFIG_BOOTCOMMAND \
-	   "run findfdt; " \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
-
 /* Miscellaneous configurable options */
 
 /* Physical Memory Map */
@@ -132,62 +114,23 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 /* MMC Configuration */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC4_BASE_ADDR
 
-/* I2C Configs */
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED		  100000
-
 /* Network */
-#define CONFIG_FEC_MXC
 
-#define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR          0x1
 
-#define CONFIG_FEC_XCV_TYPE             RGMII
-#define CONFIG_ETHPRIME                 "FEC"
-
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #endif
 
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(2, 0)
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(2, 1)
 #endif
 
-#define CONFIG_IMX_THERMAL
-
-#ifndef CONFIG_SPL_BUILD
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_MXS
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_LOGO
 #define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR
-#endif
-#endif
-
-#define CONFIG_SYS_FSL_USDHC_NUM	3
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV		2  /*USDHC4*/
-#endif
 
 #endif				/* __CONFIG_H */