X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6sxsabresd.h;h=183a7595cbebeba11077de26932443c8313ee56d;hb=6beacfcff81bdc04c10a440971b0fb683ee57534;hp=19f9e4438c5f04bbd97fe2ed030f40b5df1e74be;hpb=6f43ba70d15e15a08c25b3d956c70addb6740737;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 19f9e44..183a759 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -6,7 +6,6 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
@@ -26,7 +25,30 @@
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
+#ifdef CONFIG_IMX_BOOTAUX
+/* Set to QSPI2 B flash at default */
+#define CONFIG_SYS_AUXCORE_BOOTDATA 0x78000000
+
+#define UPDATE_M4_ENV \
+	"m4image=m4_qspi.bin\0" \
+	"loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
+	"update_m4_from_sd=" \
+		"if sf probe 1:0; then " \
+			"if run loadm4image; then " \
+				"setexpr fw_sz ${filesize} + 0xffff; " \
+				"setexpr fw_sz ${fw_sz} / 0x10000; "	\
+				"setexpr fw_sz ${fw_sz} * 0x10000; "	\
+				"sf erase 0x0 ${fw_sz}; " \
+				"sf write ${loadaddr} 0x0 ${filesize}; " \
+			"fi; " \
+		"fi\0" \
+	"m4boot=sf probe 1:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
+#else
+#define UPDATE_M4_ENV ""
+#endif
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	UPDATE_M4_ENV \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
 	"console=ttymxc0\0" \
@@ -36,6 +58,7 @@
 	"fdt_addr=0x88000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
+	"videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0" \
 	"mmcdev=2\0" \
 	"mmcpart=1\0" \
 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
@@ -124,9 +147,10 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC4_BASE_ADDR
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		  100000
 
@@ -137,9 +161,6 @@
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
 
 /* Network */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 
@@ -152,8 +173,6 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
-
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
@@ -176,22 +195,9 @@
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(2, 1)
 #endif
 
-#define CONFIG_IMX6_THERMAL
-
-#define CONFIG_CMD_FUSE
-#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
-#define CONFIG_MXC_OCOTP
-#endif
-
-#define CONFIG_CMD_TIME
-
-#define CONFIG_FSL_QSPI
+#define CONFIG_IMX_THERMAL
 
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_BAR
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SYS_FSL_QSPI_LE
 #define CONFIG_SYS_FSL_QSPI_AHB
 #ifdef CONFIG_MX6SX_SABRESD_REVA
@@ -202,6 +208,25 @@
 #define FSL_QSPI_FLASH_NUM		2
 #endif
 
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VIDEO
+#ifdef CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
+#define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR
+#endif
+#endif
+
 #define CONFIG_ENV_OFFSET		(8 * SZ_64K)
 #define CONFIG_ENV_SIZE			SZ_8K
 #define CONFIG_ENV_IS_IN_MMC