X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6slevk.h;h=5d649f6e2f08ab47421546abdc359d01c48509c7;hb=504bf790da08db9b4a443566cf6ef577f9c7996a;hp=51b297a1a3553bb51aaf09de8b2b36d763e77ef0;hpb=850f788709cef8f7d53d571aec3bfb73b14c5531;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 51b297a..5d649f6 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6SL EVK board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -12,19 +11,14 @@
 #include "mx6_common.h"
 
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #include "imx6_spl.h"
 #endif
 
-#define MACH_TYPE_MX6SLEVK		4307
-#define CONFIG_MACH_TYPE		MACH_TYPE_MX6SLEVK
+#define CONFIG_MACH_TYPE		MACH_TYPE_MX6SL_EVK
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
 
@@ -32,29 +26,17 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		  100000
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RMII
-#define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		0
 
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -69,9 +51,9 @@
 	"ip_dyn=yes\0" \
 	"mmcdev=1\0" \
 	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"finduuid=part uuid mmc 1:2 uuid\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
+		"root=PARTUUID=${uuid} rootwait rw\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
@@ -79,6 +61,7 @@
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
+		"run finduuid; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
@@ -135,12 +118,8 @@
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + SZ_512M)
 
-#define CONFIG_STACKSIZE		SZ_128K
-
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE			SZ_1G
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
@@ -154,38 +133,16 @@
 /* Environment organization */
 #define CONFIG_ENV_SIZE			SZ_8K
 
-#if defined CONFIG_SYS_BOOT_SPINOR
-#define CONFIG_ENV_IS_IN_SPI_FLASH
+#if defined CONFIG_SPI_BOOT
 #define CONFIG_ENV_OFFSET               (768 * 1024)
 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
-#define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 #else
 #define CONFIG_ENV_OFFSET		(8 * SZ_64K)
-#define CONFIG_ENV_IS_IN_MMC
-#endif
-
-#define CONFIG_CMD_SF
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_MXC_SPI
-#define CONFIG_SF_DEFAULT_BUS		0
-#define CONFIG_SF_DEFAULT_CS		0
-#define CONFIG_SF_DEFAULT_SPEED		20000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #endif
 
 /* USB Configs */
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2