X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6sabresd.h;h=e666ebb9984ab8de88a9a103e35ed8be54829529;hb=HEAD;hp=5c2734d3cce57eaf4eca97b32289012c5f60a1d6;hpb=1fdf7c64edcc4131934013741b1902b79c8715fd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 5c2734d..844f10e 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -1,66 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6Q SabreSD board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __MX6QSABRESD_CONFIG_H
-#define __MX6QSABRESD_CONFIG_H
+#ifndef __MX6SABRESD_CONFIG_H
+#define __MX6SABRESD_CONFIG_H
 
-#ifdef CONFIG_SPL
-#include "imx6_spl.h"
-#endif
+#define CFG_MXC_UART_BASE	UART1_BASE
+#define CONSOLE_DEV		"ttymxc0"
 
-#define CONFIG_MACH_TYPE	3980
-#define CONFIG_MXC_UART_BASE	UART1_BASE
-#define CONFIG_CONSOLE_DEV		"ttymxc0"
-#define CONFIG_MMCROOT			"/dev/mmcblk1p2"
+#include "mx6sabre_common.h"
 
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+/* Falcon Mode */
 
-#include "mx6sabre_common.h"
+/* Falcon Mode - MMC support: args@1MB kernel@2MB */
 
-#define CONFIG_SYS_FSL_USDHC_NUM	3
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV		1	/* SDHC3 */
-#endif
+#define CFG_SYS_FSL_USDHC_NUM	3
 
-#define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_PCIE_IMX
-#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
-#define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(3, 19)
+#define CFG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
+#define CFG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(3, 19)
 #endif
 
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED		  100000
-
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
-
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS		0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	1 /* Enabled USB controller number */
+#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CFG_MXC_USB_FLAGS		0
 #endif
 
-#endif                         /* __MX6QSABRESD_CONFIG_H */
+#endif                         /* __MX6SABRESD_CONFIG_H */